The electrode is an essential consumable on fiber fusion splicer and needs to be replaced regularly. Therefore, it is necessary to replace the electrode when replacing the electrode. It is one of the essential skills of the fiber splicer.When need to replace the electrode1. The use of optical fiber

1. Optical modem must be placed firmly, pay attention to ventilation, moisture, do not fall.2. In order to ensure the normal use, do not close the Optical modem power.3. Do not arbitrarily plug the power cable on the Optical modem, do not bend twisted fiber.4. In case of failure please try to turn o

Single-mode fiber specifications are divided into two categories, one for ITU-T G.65X series and the other IEC60793-2-50. The communication industry requires a variety of single-mode fiber jumpers, and jumper types are often determined by the diversity of single-mode fiber. In general, there are 19

With three networks‘ combination, new IPTV business and dramatic development of big data dealing and other information demands, demands for communicational network bandwidth have shown an explosive trend of growth and backbone network transmission bandwidth has achieved an average annual growth of o

With the rapid development of data center, cloud counting, cloud reservation and other applications have been gradually permeated into different industries. The bandwidth requirement of internet telecommunication also increases dramatically and the bandwidth with high speed and large capacity needs

Common fiber nouns1) AttenuationAttenuation: light’s energy loss transmitting in single-mode fiber 1310nm 0.4~0.6dB/km 1550nm 0.2~0.3dB/km plastic multi-mode fiber 300dB/km. 2) DispersionDispersion: light pulse’s march for a distance along the fiber causes the wider bandwidth. It is the main factor

Advantages of fiber telecommunication●Large telecommunication capacity●Long relay distance●No electromagnetic interference●Abundant resources●Light fiber with small volumeElectromagnetic wave spectrumTelecommunication band partitions and their corresponding transmission mediaFiber StructuresBare fib

With the development of data center operation and the increasing demands of products, pre-termination products have come into being, bringing a better solution for data center’s business. In the past, the data center always adopted the solution of welding, today’s data center, however, with the incr

IntroductionThere are different types of fiber cables with different speed as well as the distance covered. For instance, the multimode fiber is most suitable for transmission of data over a short distance and high speed while single mode is best suited in transmission of data over long distances wi