Definition of Tactical Fiber Optic CableTactical fiber optic cable is the type of fiber optic cable designed to be retrieved and deployed in the field. In most cases, tactical fiber optic cable is highly resistant to any form of mechanical damage and can survive very well in harsh conditions. The f

Definition of Fibre Optic Cable Broadband Fibre Optic Cable Broadband is the type of fiber optic which uses some special fibre-optic cables so as to deliver great internet connections to areas which are far away within a shorter time as compared to the copper lines. In fact, the internet speed goes

Definition of Active Optical CableActive Optical Cable is the type of optical cable or technology which uses the electrical inputs similar to the traditional copper lines. However, Active Optical Cable uses the optical fiber in between the connectors. This blog gives more information regarding the A

Definition of Armored Fiber Optic CableArmored Fiber Optic Cable is the type of fiber optic cable which is installed so as to add the mechanical protection. There are two types of Armored Fiber Optic Cable which are found in the market. They include; corrugated and interlocking. The Interlocking A

The fiber network is gradually replacing the copper network because of its high speed, high density, high bandwidth and other advantages. Compared with traditional coaxial cable or twisted pair cable, fiber can support further transmission distance. But in fact, the optical fiber transmission distan

Single-mode fiber specifications are divided into two categories, one for ITU-T G.65X series and the other IEC60793-2-50. The communication industry requires a variety of single-mode fiber jumpers, and jumper types are often determined by the diversity of single-mode fiber. In general, there are 19

For a long time, fiber network system uses two fibers to complete duplex communication, one for transmitting signals and the other for receiving signals. However, single-fiber bidirectional technology breaks the traditional pattern. For network managers, this technology is an ideal solution to addre

When we use the OTDR to test line and found no test jumper, we look around, and casually find a test jumper. The common situation is: two PC interfaces of the jumper are in a bare state without dust protection. Of course, we cannot see whether there is any problem on the jumper face with the eye, so