Apply to 1000BASE-LHB Standard Optical Transceiver Models
2016-12-07

Introduction

In this article we will discuss about the 1000BASE-LHB Ethernet standard and its optical transceivers and the brands offer which offers you these and their basic solutions, So you can have a basic understanding for 1000BASE-LHB technology to understand the basic solutions to 1000BASE-LHB. Also, you can check the compatible Cozlink transceivers to get compatible and cost-effective products.

What is the 1000BASE-LHB technology?

1000BASE-LHB is a fiber optic Gigabit Ethernet standard specified in IEEE 802.3 Clause 38 which uses a long wavelength laser (1,270–1,355 nm), and a maximum RMS spectral width of 4 nm. 1000BASE-LHB is specified to work over a distance of up to 5 km over 10 µm single-mode fiber. 1000BASE-LHB can also run over all common types of multi-mode fiber with a maximum segment length of 550 m. For link distances greater than 300 m, the use of a special launch conditioning patch cord may be required. This launches the laser at a precise offset from the center of the fiber which causes it to spread across the diameter of the fiber core, reducing the effect known as differential mode delay which occurs when the laser couples onto only a small number of available modes in multi-mode fiber.

1000BASE-LHB technology

1000BASE-LHB compatible brands:

Compatible Brand 
Part Number 
Description
Brocade
E1MG-LHB 
Brocade E1MG-LHB Compatible 1000BASE-LHB SFP 1550nm 150km Transceiver
Brocade 
E1MG-LHB-OM 
Brocade E1MG-LHB-OM Compatible 1000BASE-LHB SFP 1550nm 150km DOM Transceiver

Cozlink products and services: a convenient shopping platform, custom Logo, packaging, etc.

What are the Difference Between 1000BASE-LHB and 1000BASE-SX?

The 1000BASE-LHB SFP, compatible with the IEEE 802.3z 1000BASE-LX standard, operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550 m on any multimode fibers. When used over legacy multimode fiber type, the transmitter should be coupled through a mode conditioning patch cable.


The 1000BASE-SX SFP, compatible with the IEEE 802.3z 1000BASE-SX standard, operates on legacy 50 μm multimode fiber links up to 550 m and on 62.5 μm Fiber Distributed Data Interface (FDDI)-grade multimode fibers up to 220 m. It can support up to 1km over laser-optimized 50 μm multimode fiber cable.

Conclusion

Since most of the brands are only applicable to their own devices and this makes the third-party compatible optical transceiver really important as it ensures that the equipment of these brands are compatible with each other, Cozlink transceivers are known for these high performance. They are easily compatible with a huge number of brands and the prices you get on Cozlink is really less than the prices on original manufacturer All this makes Cozlink the perfect place for third-party compatible optical transceiver for 1000BASE-LHB Ethernet standard solution. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.

TECHNICAL SUPPORT
Get solutions or consultation from the technical team.