Optical Transceivers for Cisco WS-C2960XR-48FPD-I Switch

Cisco WS-C2960XR-48FPD-I Switch Overview

WS-C2960XR-48FPD-I belongs to the Cisco Catalyst 2960-XR Series Switches; it’s an ideal product for enterprise-class business. Cisco catalyst 2960X-48FPD-I IP Lite Base layer 2-3 stackable switch is comprised of 48 * Ethernet 10/100/1000 ports with POE+ and 2 SFP+ 10G uplink interfaces. Advanced energy management solution with intelligent services reduces the cost of business development. FlexStack plus technology supports up to 8 switches with 80Gbps of stack throughput. Cisco IOS software features enhance forwarding process and USB/Ethernet management interface simplify the operations. The industry standard IEEE802.3at PoE+ provides up to 30W per port. Netflow lite simplifies the network traffic monitoring procedure by capturing and recording packet flows in order to find the cause of thrill on the network. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM stub, etc.

Cisco WS-C2960XR-48FPD-I Switch

Cisco WS-C2960XR-48FPD-I Switch Parameters

Device Type 

Switch - 48 ports - L3 - Managed - stackable          

Enclosure Type
Desktop, rack-mountable 1U
Subtype
Gigabit Ethernet
Ports
48 x 10/100/1000 (PoE+) + 2 x SFP+
Power Over Ethernet (PoE)
PoE+
PoE Budget
740 W
Performance
Switching capacity: 216 Gbps ¦ Forwarding performance: 130.9 Mpps
Jumbo Frame Support 
9216 bytes
Routing Protocol 
OSPF, RIP-1, RIP-2, HSRP, VRRP, PIM-SM, PIM-DM, PIM-SSM, policy-based routing (PBR), RIPng
Remote Management Protocol 
SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH, CLI
Features

Layer 2 switching, power over Ethernet (PoE), auto-negotiation, ARP support, Cisco Fast

EtherChannel, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Intrusion

Detection System (IDS), Broadcast Storm Control, IPv6 support, Multicast Storm Control,

Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning

Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support,

Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access

Control List (ACL) support, Quality of Service (QoS), RADIUS support, SSH support, Jumbo

Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Cisco EnergyWise

technology, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus

(PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP),

MAC Address Notification, Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Per-VLAN

Rapid Spanning Tree (PVRST), NetFlow, Hot Standby Router Protocol (HSRP) support, Energy

Efficient Ethernet, Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Class of

Service (CoS), Cisco FlexStack Plus

Compliant Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX
Power
AC 120/230 V ( 50/60 Hz )
Power Redundancy 
Optional
Dimensions (WxDxH) 
44.5 cm x 40.8 cm x 4.45 cm 
Weight
6.6 kg

Optical Transceivers for Cisco WS-C2960XR-48FPD-I Switch

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000BASE-BX-D, 1000BASE-BX-U, 1000Base-LX/LH, 1000BASE-SX, 1000BASE-ZX, 1000BASE-T, 100BASE-FX. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number 
Description
Price 
SFP-H10GB-CU1M
Cisco SFP-H10GB-CU1M Compatible 10G SFP+ DAC Twinax Cable (1-meter, passive, SFP+ to SFP+, 30AWG) 

 SFP-H10GB-CU3M
Cisco SFP-H10GB-CU3M Compatible 10G SFP+ DAC Twinax Cable (3-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU5M
Cisco SFP-H10GB-CU5M Compatible 10G SFP+ DAC Twinax Cable (5-meter, passive, SFP+ to SFP+, 24AWG)

SFP-10G-SR
Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver 
US$16.00
SFP-10G-LRM 
Cisco SFP-10G-LRM Compatible 10GBASE-LRM SFP+ 1310nm 220m DOM Transceiver
US$32.55
SFP-10G-LR
Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver
US$32.55
SFP-10G-ER 
Cisco SFP-10G-ER Compatible 10GBase-ER SFP+ 1550nm 40km Transceiver Module
US$153.45
SFP-10G-SR-S
Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 850nm 300m 
US$16.00 
SFP-10G-LR-S
Cisco SFP-10G-LR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 10km 
US$32.55
SFP-10G-ER-S
Cisco SFP-10G-ER-S Transceiver Module Compatible 10G 10G SFP+ 1550nm 40km
US$153.45
SFP-10G-ZR 
Cisco SFP-10G-ZR Compatible 10GBASE-ZR/ZW and OTU2e SFP+ 1550nm 80km DOM Transceiver
US$339.45
SFP-10G-ZR-S 
Cisco SFP-10G-ZR-S Transceiver Module Compatible 10G SFP+ Pluggable 1550nm 80km 
US$339.45
DWDM SFP+
10G SFP+ DWDM 40km Transceiver CH17~CH61 LC SM Duplex DDM Optical Module 
US$260.40 
SFP-H10GB-CU1-5M 
Cisco SFP-H10GB-CU1-5M Compatible 10G SFP+ DAC Twinax Cable (1.5-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU2M 
Cisco SFP-H10GB-CU2M Compatible 10G SFP+ DAC Twinax Cable (2-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU2-5M
Cisco SFP-H10GB-CU2-5M Compatible 10G SFP+ DAC Twinax Cable (2.5-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-ACU7M Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG)

SFP-H10GB-ACU10M
Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG) 

SFP-10G-AOC1M
Cisco SFP-10G-AOC1M Compatible 10G SFP+ AOC (1-meter, SFP+ to SFP+)

SFP-10G-AOC2M 
Cisco SFP-10G-AOC2M Compatible 10G SFP+ AOC (2-meter, SFP+ to SFP+)

SFP-10G-AOC3M 
Cisco SFP-10G-AOC3M Compatible 10G SFP+ AOC (3-meter, SFP+ to SFP+)

SFP-10G-AOC5M
Cisco SFP-10G-AOC5M Compatible 10G SFP+ AOC (5-meter, SFP+ to SFP+) 

SFP-10G-AOC7M 
Cisco SFP-10G-AOC7M Compatible 10G SFP+ AOC (7-meter, SFP+ to SFP+) 

SFP-10G-AOC10M
Cisco SFP-10G-AOC10M Compatible 10G SFP+ AOC (10-meter, SFP+ to SFP+) 

GLC-T
Cisco GLC-T Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver 
US$13.02
GLC-TE 
Cisco GLC-TE Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver 
US$13.02 
GLC-SX-MM
Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m Transceiver 
US$6.00
GLC-LH-SM
Cisco GLC-LH-SM Compatible 1000Base-LX/LH SFP 1310nm 10km Transceiver
US$7.00
GLC-ZX-SM
Cisco GLC-ZX-SM Compatible 1000BASE-ZX SFP 1550nm 70km Transceiver
US$24.00 
GLC-ZX-SMDCisco GLC-ZX-SMD Compatible 1000BASE-ZX SFP 1550nm 70km DOM Transceiver 
US$24.00 
GLC-BX-D
Cisco GLC-BX-D Compatible 1000BASE-BX-D SFP 1490nm-TX/1310nm-RX 10km DOM Transceiver
US$12.00 
GLC-BX-U
Cisco GLC-BX-U Compatible 1000BASE-BX-U SFP 1310nm-TX/1490nm-RX 10km DOM Transceiver
US$9.00 
CWDM SFP
1.25G CWDM SFP 1270~1450nm 120km LC DDM Optical Transceiver
US$55.00
GLC-SX-MMD 
Cisco GLC-SX-MMD Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver
US$6.00 
GLC-LH-SMD
Cisco GLC-LH-SMD Compatible 1000Base-LX/LH SFP 1310nm 10km DOM Transceiver
US$7.00
GLC-EX-SMD
Cisco GLC-EX-SMD Compatible 1000BASE-EX SFP 1310nm 40km DOM Transceiver
US$12.00 
GLC-GE-100FX 
Cisco GLC-GE-100FX Compatible 100BASE-FX SFP 1310nm 2km Transceiver for Gigabit Ethernet SFP Ports 
US$6.98
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco WS-C2960XR-48FPD-I Switch is a special switch designed by Cisco System to display unimaginable performance and quality at an affordable price. It offers up to 48 ports for the business allowing it to be integrated into any network quickly and easily. These switches are compatible with various Gigabit Ethernet SFP optical transceivers. All these fiber optic transceivers are available on Cozlink at really competitive prices. You can expect same day shipping on Cozlink. Not just optical transceivers, you can also find fiber optic pigtails and high speed cables for your choice on Cozlink.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.