- Related articles
- How to check the speed of network card?
- What are SFP slots?
- All Cisco DWDM-XFP-42.14's information (List price, Specs, Datasheet PDF, Compatibility ma
- Optical Transceivers for Cisco WS-C3650-48FWD-S Switch
- What is PAM Authentication?
- All Cisco GLC-BX-U's information (List price, Specs, Datasheet PDF, Compatibility matrix)
- What is QSFP transceiver?
- Optical Transceivers for Cisco WS-C3650-48TS-S Switch
- What does SFP stand for?
- What is SFP Connector?
Recommend tag
You can learn about us through other platforms
Optical Transceivers for Cisco N9K-C9372TX-E Switch
2016-11-18
Cisco N9K-C9372TX-E Switch Overview
N9K-C9372TX-E belongs to the Cisco Catalyst Nexus 9000 Series Switches; these switches are ideal for traditional or fully automated data center deployments. The Cisco Nexus 9372TX Switch offers a line-rate layer 2 and layer 3 features set in a compact form factor. It offers a flexible switching platform for both 3-tier and spine-leaf architectures as a leaf node. With the option to operate in Cisco NX-OS or Application Centric Infrastructure (ACI) mode, it can be deployed within small business, enterprise, and service provider architectures.
Cisco N9K-C9372TX-E Switch Parameters
| Device Type | Switch - 48 ports - L3- Managed |
| Enclosure Type | Desktop, rack-mountable 1U |
| Subtype | 10 Gigabit Ethernet |
| Ports | 48 x 10GBase-T + 6 x 40 Gigabit QSFP+ (uplink) |
| Performance | Bandwidth: 1.44 Tbps |
| Capacity | Longest prefix match (LPM) entries (IPv4): 16000 ¦ Host table entries (IPv4): 208000 ¦ IPv4 routes (Multicast): 32000 ¦ Virtual interfaces (VLANs): 4096 ¦ Equal-Cost Multipathing (ECMP) ways: 64 ¦ Multiple Spanning Tree Protocol instances: 64 ¦ Rapid Per-VLAN Spanning Tree Plus instances: 507 ¦ Virtual Routing and Forwarding (VRF) entries: 1000 ¦ IGMP snooping entries: 32000 ¦ ACL entries (ingress): 4000 ¦ ACL entries (egress): 1000 |
| MAC Address Table Size | 96K entries |
| Jumbo Frame Support | 9216 bytes |
| Features | VLAN support, IGMP snooping, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Per-VLAN Rapid Spanning Tree (PVRST), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF), Virtual PortChannel (vPC) technology, VXLAN tunnel endpoints (VTEP) support |
| Power Redundancy | Yes |
| Dimensions (WxDxH) | 43.9 cm x 57.1 cm x 4.4 cm |
| Weight | 10.1 kg |
Optical Transceivers for Cisco N9K-C9372TX-E Switch
Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 40G QSFP+, AOC, 40G QSFP+ SR, 40G QSFP+ CSR4, 40G QSFP+ LR. For more information on these Cisco optical transceivers, please check the following table.
| MFG Part number | Description | Price |
| SFP-10G-SR | Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver | US$16.00 |
| SFP-10G-LR | Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver | US$32.55 |
| SFP-10G-ER | Cisco SFP-10G-ER Compatible 10GBase-ER SFP+ 1550nm 40km Transceiver Module | US$153.45 |
| SFP-H10GB-CU1M | Cisco SFP-H10GB-CU1M Compatible 10G SFP+ DAC Twinax Cable (1-meter, passive, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-CU3M | Cisco SFP-H10GB-CU3M Compatible 10G SFP+ DAC Twinax Cable (3-meter, passive, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-CU5M | Cisco SFP-H10GB-CU5M Compatible 10G SFP+ DAC Twinax Cable (5-meter, passive, SFP+ to SFP+, 24AWG) | |
| SFP-H10GB-ACU7M | Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-ACU10M | Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG) | |
| SFP-10G-SR-S | Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 850nm 300m | US$16.00 |
| SFP-10G-LR-S | Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 300m | US$32.55 |
| SFP-10G-ER-S | Cisco SFP-10G-ER-S Transceiver Module Compatible 10G 10G SFP+ 1550nm 40km | US$153.45 |
| SFP-10G-ZR-S | Cisco SFP-10G-ZR-S Transceiver Module Compatible 10G SFP+ Pluggable 1550nm 80km | US$339.45 |
| SFP-H10GB-CU1-5M | Cisco SFP-H10GB-CU1-5M Compatible 10G SFP+ DAC Twinax Cable (1.5-meter, passive, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-CU2M | Cisco SFP-H10GB-CU2M Compatible 10G SFP+ DAC Twinax Cable (2-meter, passive, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-CU2-5M | Cisco SFP-H10GB-CU2-5M Compatible 10G SFP+ DAC Twinax Cable (2.5-meter, passive, SFP+ to SFP+, 30AWG) | |
| SFP-10G-AOC1M | Cisco SFP-10G-AOC1M Compatible 10G SFP+ AOC (1-meter, SFP+ to SFP+) | |
| SFP-10G-AOC2M | Cisco SFP-10G-AOC2M Compatible 10G SFP+ AOC (2-meter, SFP+ to SFP+) | |
| SFP-10G-AOC3M | Cisco SFP-10G-AOC3M Compatible 10G SFP+ AOC (3-meter, SFP+ to SFP+) | |
| SFP-10G-AOC5M | Cisco SFP-10G-AOC5M Compatible 10G SFP+ AOC (5-meter, SFP+ to SFP+) | |
| SFP-10G-AOC7M | Cisco SFP-10G-AOC7M Compatible 10G SFP+ AOC (7-meter, SFP+ to SFP+) | |
| SFP-10G-AOC10M | Cisco SFP-10G-AOC10M Compatible 10G SFP+ AOC (10-meter, SFP+ to SFP+) | |
| SFP-10G-ZR | Cisco SFP-10G-ZR Compatible 10GBASE-ZR/ZW and OTU2e SFP+ 1550nm 80km DOM Transceiver | US$339.45 |
| SFP-10G-BXD-I | Cisco SFP-10G-BXD-I Transceiver Module Compatible 10G BIDI SFP+ 1330nm TX/1270nm RX 10km | US$60.45 |
| SFP-10G-BXU-I | Cisco SFP-10G-BXU-I Transceiver Module Compatible 10G WDM BIDI SFP+ 1270nm TX/1330nm RX 10km | US$60.45 |
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.
How to determine what types of optical transceivers for Cisco switches?
1. Finding the corresponding optical module compatibility matrix via Cisco official website.
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.
Summary
The Cisco N9K-C9372TX-E switch is high-density, nonblocking, low-power-consuming switches designed for ToR, MoR, or EoR deployment in enterprise data centers, service provider facilities, and large virtualized and cloud computing environments. These switches are compatible with various Gigabit Ethernet SFP optical transceivers. All these fiber optic transceivers are available on Cozlink at really competitive prices. You can expect same day shipping on cozlink. Not just optical transceivers, you can also find fiber optic pigtails and high speed cables for your choice on cozlink.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.