- Related articles
- Optical Transceivers for Cisco ESW-520-48P-K9 Switch
- What is PCI Wireless Ethernet Adapter?
- The Difference between Dedicated and Integrated Network Card
- Optical Transceivers for Cisco N5548P-4N2248TP Switch
- Optical Transceivers for Cisco ME-3400-24TS-D Switch
- What Is Network Card PCI Express x4?
- Apply to 100BASE-ZX Standard Optical Transceiver Models
- Optical Transceivers for Cisco N3K-C3548P-10G= Switch
- What Is Network Card PCI Express x1?
- What is 10GBASE-T transceiver?
Recommend tag
You can learn about us through other platforms
Optical Transceivers for Cisco UCS-FI-6248UP-CH2 Switch
Cisco UCS-FI-6248UP-CH2 Switch Overview
UCS-FI-6248UP-CH2 belongs to the Cisco Catalyst UCS 6200 Series Switches; it’s an ideal product for Small Business. The Cisco UCS 6200 series Fabric Interconnect is a core part of the Cisco Unified Computing System, providing both network connectivity and management capabilities for the system. The Cisco UCS 6200 series offers line-rate, low-latency, lossless 10 Gigabit Ethernet and Fiber Channel over Ethernet (FCoE) functions. In addition, by supporting unified fabric, the Cisco UCS 6200 series provides both the LAN and SAN connectivity for all blades within its domain. From a networking perspective, the Cisco UCS 6200 series uses a cut-through architecture, supporting deterministic, low-latency, line-rate 10 Gigabit Ethernet on all ports, independent of packet size and enabled services.
Cisco UCS-FI-6248UP-CH2 Switch Parameters
| Device Type | Switch - 32 ports - Managed |
| Enclosure Type | Rack-mountable 1U |
| Subtype | 10 Gigabit Ethernet |
| Ports | 12 x 10 Gigabit / FCoE SFP+ |
| Performance | Throughput: 960 Gbps |
| MAC Address Table Size | 32000 entries |
| Jumbo Frame Support | 9216 bytes |
| Remote Management Protocol | RMON |
| Features | Layer 2 switching, IGMP snooping, Data Center Bridging Exchange (DCBX) support, Quality of Service (QoS), Rapid Per-VLAN Spanning Tree Plus (PVRST+) |
| Compliant Standards | IEEE 802.3, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s |
| Power Redundancy | Optional |
| Dimensions (WxDxH) | 43.9 cm x 76.2 cm x 4.4 cm |
Optical Transceivers for Cisco UCS-FI-6248UP-CH2 Switch
Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 10GBASE-SR, 10GBASE-LRM, 10GBASE-LR, 10GBASE-LR/LW, 10GBASE-ERM, 10GBASE-ZR/ZW, DAC Twinax Cable. For more information on these Cisco optical transceivers, please check the following table.
| MFG Part number | Description | Price |
| SFP-10G-SR | Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver | US$16.00 |
| SFP-10G-SR-S | Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 850nm 300m | US$16.00 |
| SFP-10G-SR-X | Cisco SFP-10G-SR-X Compatible 10GBase-SR SFP+ 850nm 300m Transceiver | US$16.00 |
| SFP-10G-LRM | Cisco SFP-10G-LRM Compatible 10GBASE-LRM SFP+ 1310nm 220m DOM Transceiver | US$32.55 |
| SFP-10G-LR | Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver | US$32.55 |
| SFP-10G-LR-S | Cisco SFP-10G-LR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 10km | US$32.55 |
| SFP-10G-LR-X | Cisco SFP-10G-LR-X Compatible 10GBASE-LR/LW and OTU2e SFP+ 1310nm 10km EXT DOM Transceiver | US$32.55 |
| SFP-10G-ER | Cisco SFP-10G-ER Compatible 10GBase-ER SFP+ 1550nm 40km Transceiver Module | US$153.45 |
| SFP-10G-ER-S | Cisco SFP-10G-ER-S Transceiver Module Compatible 10G 10G SFP+ 1550nm 40km | US$153.45 |
| SFP-10G-ZR | Cisco SFP-10G-ZR Compatible 10GBASE-ZR/ZW and OTU2e SFP+ 1550nm 80km DOM Transceiver | US$339.45 |
| SFP-10G-ZR-S | Cisco SFP-10G-ZR-S Transceiver Module Compatible 10G SFP+ Pluggable 1550nm 80km | US$339.45 |
| SFP-H10GB-CU1M | Cisco SFP-H10GB-CU1M Compatible 10G SFP+ DAC Twinax Cable (1-meter, passive, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-CU3M | Cisco SFP-H10GB-CU3M Compatible 10G SFP+ DAC Twinax Cable (3-meter, passive, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-CU5M | Cisco SFP-H10GB-CU5M Compatible 10G SFP+ DAC Twinax Cable (5-meter, passive, SFP+ to SFP+, 24AWG) | |
| SFP-H10GB-ACU7M | Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-ACU10M | Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG) |
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.
How to determine what types of optical transceivers for Cisco switches?
1. Finding the corresponding optical module compatibility matrix via Cisco official website.
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.
Summary
The Cisco UCS-FI-6248UP-CH2 supports Cisco low-latency, lossless 10 Gigabit Ethernet unified network fabric capabilities, which increase the reliability, efficiency, and scalability of Ethernet networks. The fabric interconnect supports multiple traffic classes over a lossless Ethernet fabric from the blade through the interconnect. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.