Optical Transceivers for Cisco N5K-C5010P-B-S Switch

Cisco N5K-C5010P-B-S Switch Overview

N5K-C5010P-B-S belongs to the Cisco Catalyst Nexus 5000 Series Switches; these switches are ideal for traditional or fully automated data center deployments. The Cisco Nexus 5000 series, part of the Cisco Nexus family of data center-class switches, delivers an innovative architecture that simplifies data center transformation. These switches deliver high-performance, standards-based Ethernet and FCoE that enables the consolidation of LAN, SAN, and cluster network environments onto a single Unified Fabric and backed by a broad group of industry-leading complementary technology vendors.

Cisco N5K-C5010P-B-S Switch

Cisco N5K-C5010P-B-S Switch Parameters

Device Type 
Switch - 20 ports - Managed - with 2x Cisco MDS 9000 Family 2/4/8-Gbps Fibre Channel-Shortwave, SFP+, LC (DS-SFP-FC8G-SW), 2x Cisco 10GBASE-SR SFP+ Module (SFP-10G-SR), N5K 8G FC Expansion Module for LAB Bundle (N5K-M1060-LAB)               
Enclosure Type
Desktop 1U
Subtype
10 Gigabit Ethernet
Ports
20 x SFP+ + 6 x 8Gb Fibre Channel SFP+ 
MAC Address Table Size
16K entries
Jumbo Frame Support
9216 bytes 
Remote Management Protocol 
SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SMI-S, SSH-2, CLI 
Features

Layer 2 switching, trunking, VLAN support, Syslog support, packet filtering, Weighted Round

Robin (WRR) queuing, MAC address filtering, Broadcast Storm Control, IPv6 support, ASIC VPN,

Multicast Storm Control, Unicast Storm Control, Per-VLAN Spanning Tree (PVST), Multiple Spanning

Tree Protocol (MSTP) support, priority-based flow control, Access Control List (ACL) support, Quality of Service (QoS)

Compliant Standards
IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP) 
Power 
AC 120/230 V ( 50/60 Hz ) 
Power Redundancy
Yes
Dimensions (WxDxH)
43.9 cm x 76.2 cm x 4.4 cm

Optical Transceivers for Cisco N5K-C5010P-B-S Switch 

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 10GBASE-SR, 10GBASE-LR, 10G SFP+ DAC Twinax Cable. For more information on these Cisco optical transceivers, please check the following table.

MFG Part number
Description
Price
SFP-10G-SR 
Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver 
US$16.00 
SFP-10G-LR
Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver
US$32.55
SFP-10G-SR-S 
Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 850nm 300m
US$16.00
SFP-10G-LR-S
Cisco SFP-10G-LR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 10km 
US$32.55
SFP-H10GB-CU1M
Cisco SFP-H10GB-CU1M Compatible 10G SFP+ DAC Twinax Cable (1-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU3M
Cisco SFP-H10GB-CU3M Compatible 10G SFP+ DAC Twinax Cable (3-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU5M
Cisco SFP-H10GB-CU5M Compatible 10G SFP+ DAC Twinax Cable (5-meter, passive, SFP+ to SFP+, 24AWG) 

SFP-H10GB-ACU7M
Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG) 

SFP-H10GB-ACU10M
Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG)

Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco N5K-C5010P-B-S Switches are designed to meet the challenges of next-generation data centers, including dense multisocket, multicore, virtual machine-optimized deployments, where infrastructure sprawl and increasingly demanding workloads are commonplace. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.