Optical Transceivers for Cisco IE-2000-4TS-G-B Switch

Cisco IE-2000-4TS-G-B Switch Overview

IE-2000-4TS-G-B belongs to the Cisco Catalyst IE 2000 Series Switches; it’s an ideal product for multiple industries such as automotive, oil and gas, mining, transportation, and energy companies are all increasingly requiring IP based networks in their production areas. The Cisco Industrial Ethernet 2000 (IE 2000) series is a range of compact, industrially ruggedized access switches. IE 2000 series provides customers with ease of use, secure access, and industry leading convergence using Cisco Resilient Ethernet Protocol (REP). 

Cisco IE-2000-4TS-G-B Switch

Cisco IE-2000-4TS-G-B Switch Parameters

Device Type  Switch - 4 ports - Managed                 
Enclosure Type  DIN rail mountable 
Subtype Fast Ethernet
Ports 4 x 10/100 + 2 x Gigabit SFP 
Performance Forwarding performance (64-byte packet size): 6.5 Mpps  
Capacity Virtual interfaces (VLANs): 255
MAC Address Table Size 8K entries
Routing Protocol IGMP, static IPv4 routing
Remote Management Protocol SNMP 3, HTTPS, SSH
Features

DHCP support, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support,

Rapid Spanning Tree Protocol (RSTP) support, Quality of Service (QoS), Port Security, Remote Switch Port Analyzer (RSPAN)

Compliant Standards IEEE 802.1x
Dimensions (WxDxH)  7.37 cm x 11.46 cm x 12.7 cm
 Weight 1.11 kg

Optical Transceivers for Cisco IE-2000-4TS-G-B Switch 

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000BASE-T, 1000BASE-SX, 1000Base-LX/LH, 1000BASE-ZX, 1000BASE-BX-D, 1000BASE-BX-U, 1000BASE-EX. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number Description Price 
GLC-T Cisco GLC-T Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver  US$13.02
GLC-TE Cisco GLC-TE Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver  US$13.02 
GLC-SX-MM Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m Transceiver  US$6.00 
GLC-LH-SM  Cisco GLC-LH-SM Compatible 1000Base-LX/LH SFP 1310nm 10km Transceiver US$7.00 
GLC-ZX-SM Cisco GLC-ZX-SM Compatible 1000BASE-ZX SFP 1550nm 70km Transceiver  US$24.00 
GLC-BX-D Cisco GLC-BX-D Compatible 1000BASE-BX-D SFP 1490nm-TX/1310nm-RX 10km DOM Transceiver US$12.00 
GLC-BX-U Cisco GLC-BX-U Compatible 1000BASE-BX-U SFP 1310nm-TX/1490nm-RX 10km DOM Transceiver  US$9.00 
SFP-GE-S Cisco SFP-GE-S Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver US$6.00
SFP-GE-L  Cisco SFP-GE-L Compatible 1000BASE-LX/LH SFP 1310nm 10km DOM Transceiver US$7.00
GLC-EX-SMD Cisco GLC-EX-SMD Compatible 1000BASE-EX SFP 1310nm 40km DOM EXT Transceiver US$12.00
SFP-GE-Z  Cisco SFP-GE-Z Compatible 1000BASE-ZX SFP 1550nm 70km DOM EXT Transceiver US$24.00 
GLC-SX-MM-RGD Cisco GLC-SX-MM-RGD Compatible 1000BASE-SX SFP 850nm 550m DOM IND Transceiver US$8.79
GLC-LX-SM-RGD  Cisco GLC-LX-SM-RGD Compatible 1000BASE-LX/LH SFP 1310nm 10km DOM IND Transceiver US$7.00 
GLC-ZX-SM-RGD Cisco GLC-ZX-SM-RGD Compatible 1000BASE-ZX SFP 1550nm 70km DOM IND Transceiver  US$24.00
GLC-SX-MMD Cisco GLC-SX-MMD Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver US$6.00 
GLC-LH-SMD Cisco GLC-LH-SMD Compatible 1000Base-LX/LH SFP 1310nm 10km DOM Transceiver  US$7.00
GLC-ZX-SMD  Cisco GLC-ZX-SMD Compatible 1000BASE-ZX SFP 1550nm 70km DOM EXT Transceiver US$24.00
CWDM-SFP  Ciena CWDM-SFP10G-1470 Transceiver Module Compatible 10G CWDM SFP+ ER hot Pluggable CWDM 1470-1610nm 40km  US$302.25 
DWDM-SFP  Cisco DWDM-SFP-3033 Transceiver Module Compatible 1.25G DWDM SFP DWDM:1528~1564nm 80km US$186.00
GLC-BX40-U-I  Cisco GLC-BX40-U-I Transceiver Module 1000BASE-BX 40Compatible 1.25G WDM SFP 1310nm TX/1550nm RX 40km  US$16.74
GLC-BX40-D-I  Cisco GLC-BX40-D-I Transceiver Module Compatible 1.25G SFP BIDI 1550nm TX/1310nm RX 40km US$22.32
GLC-BX40-DA-I  Cisco GLC-BX40-DA-I Transceiver Module Compatible 1000BASE-BX40 1.25G WDM SFP 1490nm TX/1310nm RX 40km  US$23.25
GLC-BX80-U-I   Cisco GLC-BX80-U Compatible 1000BASE-BX BiDi SFP 1490nm-TX/1570nm-RX 80km DOM Transceiver  
GLC-BX80-D-I  Cisco GLC-BX80-D Compatible 1000BASE-BX BiDi SFP 1570nm-TX/1490nm-RX 80km DOM Transceiver  
GLC-FE-100FX-RGD Cisco GLC-FE-100FX-RGD Compatible 100BASE-FX SFP 1310nm 2km DOM Transceiver  US$6.98 
GLC-FE-100LX-RGD Cisco GLC-FE-100LX-RGD Compatible 100BASE-LX10 SFP 1310nm 10km DOM Transceiver US$8.84
GLC-FE-100BX-U  Cisco GLC-FE-100BX-U Compatible 100BASE-BX-U SFP 1310nm-TX/1550nm-RX 10km DOM Transceiver  US$8.84 
GLC-FE-100FX  Cisco GLC-FE-100FX Compatible 100BASE-FX SFP 1310nm 2km DOM Transceiver US$6.98 
GLC-FE-100LX Cisco GLC-FE-100LX Compatible 100BASE-LX10 SFP 1310nm 10km Transceiver  US$8.84 
GLC-FE-100EX  Cisco GLC-FE-100EX Compatible 100BASE-EX SFP 1310nm 40km DOM Transceiver  US$8.37
GLC-FE-100ZX  Cisco GLC-FE-100ZX Compatible 100BASE-ZX SFP 1550nm 80km DOM Transceiver US$186.00
GLC-FE-100BX-D Cisco GLC-FE-100BX-D Compatible 100BASE-BX-D SFP 1550nm-TX/1310nm-RX 10km DOM Transceiver US$9.77 
GLC-FE-T-I Cisco GLC-FE-T-I Transceiver Module Compatible 10/100M SFP Copper ,, 100m US$13.02
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

IE-2000-4TS-G-B is the IE2000 series IE 4 10/100, 2 GE, and LAN Base switch. The Cisco IE 2000 Series are designed for low cost, low ports, and small sizes. They offer:

1. Four, eight, or 16 10/100Base-T Ethernet ports (Small Form-Factor Pluggable [SFP] downlinks on selected models); fixed configurations with a compact form factor

2. Two gigabit combo ports: SFP (100 Mbps and 1 Gbps) or RJ45 uplink

3. Dual-input DC power supply, alarm relays, DIN rail mount

4. Industrial Power over Ethernet (PoE) solution

5. Conformal coating available

6. Swappable SD flash card and mini-USB connector

7. Industrial environmental compliance and certifications

8. Industrial partner applications: Ethernet/IP and PROFINET

Description

Industrial Ethernet (IE) 2000 Series switches extend the proven Cisco Catalyst technologies prevalent in enterprise networks to industrial networks. Superior security, video, and voice services are thus extended to industrial applications. These switches are also ruggedized, easy to manage, resilient, and enhanced through support of industry protocols. Cisco Industrial Ethernet 2000 Series switches are fixed platforms that deliver Layer 2 switching with proven Cisco IOS Software. With their extensive certifications and wide range of power supply voltage input and operation temperatures, these switches are suitable for almost all industrial applications. They support IEEE 1588, Common Industrial Protocol (CIP), and PROFINET v.2, among other industry protocols.These switches also offer:

  • Industrial Power over Ethernet (PoE) and enhanced PoE make it possible for the switches to directly connect to communication devices like IP cameras and IP phones.

  • Support for IEEE 802.1x, Secure Shell (SSH) Protocol, Dynamic Host Configuration Protocol (DHCP) snooping, and storm control

  • Extended Enterprise capability with Cisco DNA Center management

  • Easy deployment, with zero-touch discovery using DHCP and an express setup with a swappable SD flash card

  • A user-friendly device manager, the Cisco Network Assistant, a Cisco Prime interface, and third-party management solutions

  • Resilience and fast network recovery with Flex Links, fast convergence with Cisco Resilient Ethernet Protocol and PROFINET MRP, and simplified IP address management and deployment

  • Easily managed by Cisco Industrial Network Director, a network management system purpose built for industrial applications that uses the complete capabilities of the Cisco Industrial Ethernet product family to make the network easily accessible to non-IT operations personnel.

Robust Industrial Design and Build Quality

The Cisco IE-2000-4TS-G-B is built to withstand the harshest industrial environments. Its rugged design ensures reliability even in extreme temperatures, humidity, and vibrations. With its high-quality components and industrial-grade casing, this switch is engineered for longevity and optimal performance.

Enhanced Network Security

In the age of digital threats, network security is of paramount importance. The IE-2000-4TS-G-B prioritizes security with advanced features like port security, Access Control Lists (ACLs), and Secure Shell (SSH) protocols. It safeguards critical data and prevents unauthorized access, giving you peace of mind in your industrial network.

Efficient Power Management

Power efficiency is a key concern in industrial settings. The Cisco IE-2000-4TS-G-B incorporates Power over Ethernet (PoE) technology, allowing you to power compatible devices without the need for separate power sources. This feature not only reduces cable clutter but also lowers operational costs.

Flexible Connectivity Options

The switch offers a variety of connectivity options, including Fast Ethernet, Gigabit Ethernet, and combo ports. This versatility allows seamless integration with diverse industrial devices and equipment, making it an ideal choice for modern industrial setups.

Easy Network Management and Monitoring

Managing complex industrial networks can be challenging, but the IE-2000-4TS-G-B simplifies the process with its user-friendly interface. Its intuitive management tools enable efficient network monitoring, configuration, and troubleshooting, minimizing downtime and maximizing productivity.

Summary

The Cisco IE-2000-4TS-G-B switches have been designed to support access layer connectivity and to meet the increasing needs for security, voice, and video traffic across industrial networks. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.

TECHNICAL SUPPORT
Get solutions or consultation from the technical team.