Cisco Catalyst 6500 WS-X6816-GBIC Expansion Module 16-Port Gigabit Ethernet
2016-08-22

The 16-Port Gigabit Ethernet switching module provides 16 switched, full-duplex Gigabit Ethernet ports that you can configure with any combination of 1000BASE-SX, LX/LH, and ZX GBICs, Copper GBICs, or CWDM GBICs.

GBIC Transceiver

Additional Information

  • Backplane Connection: Switch fabric (dual channel)
  •  Forwarding: Distributed forwarding with integrated DFC
  •  Number of Transmit Queues/Port: 3
  •  Number of Receive Queues/Port: 2
  •  The WS-X6816-GBIC is a fabric-dependent module that has enhanced QoS  features
  •  The QoS port architecture (Rx/Tx) for this module is 1p1q4t/1p2q2t
  •  Optics: Support hot-pluggable GBICs over single-mode fiber
  •  Forwarding performance: Forward packets up to 24 Mpps per slot when interface modules have dual-fabric connections
  •  Fabric connection: Connect using dual 8-Gbps full-duplex serial channel connections to fabric on a Supervisor Engine 720 or a SFM

System Requirements

  • Port Density/Chassis Model:
  •  90 ports (Cisco Catalyst 6513)
  •  128 ports (Cisco Catalyst 6509)
  •  System Requirements The WS-X6816-GBIC module has the following installation restrictions:
  •  The WS-X6816-GBIC cannot be installed in a Catalyst 6000 series switch
  •  The WS-X6816-GBIC requires a Supervisor Engine 2
  •  A Switch Fabric Module must be installed in the Catalyst 6500 series switch chassis when a WS-X6816-GBIC module is installed
  •  The WS-X6816-GBIC can be installed in slots 2 through 6 in the Catalyst 6506  switch
  •  The WS-X6816-GBIC can be installed in slots 2 through 9 in the Catalyst 6509 and Catalyst 6509-NEB switches
  •  The WS-X6816-GBIC can only be installed in slots 9 through 13 in the Catalyst 6513 switch; it cannot be installed in slots 2 through 8

Compatibility

  • Cisco Catalyst 6503 chassis
  • Cisco Catalyst 6506 chassis
  •  Cisco Catalyst 6509 chassis
  •  Cisco Catalyst 6509-NEB chassis
  •  Cisco Catalyst 6509-NEB-A chassis
  •  Cisco Catalyst 6513 chassis
  •  Cisco 7603 chassis
  •  Cisco 7606 chassis
  •  Cisco 7609 chassis
  •  Cisco OSR-7609 chassis
  •  Cisco 7613 chassis


Cozlink can provide Compatible GBIC modules for you, Cisco compatible GBIC transceiver support Ethernet, Sonnet/SDH and Fiber Channel applications across all Cisco switching and routing platforms. All our GBIC transceivers are 100% compatible with major brands. Cozlink is an professional manufacturer & supplier of fiber transceivers. All of our transceivers are tested in-house prior to shipping to guarantee that they will arrive in perfect physical and working condition. We guarantee transceivers to work in your system and all of our transceivers come with a lifetime advance replacement warranty.

Certifications & Standards

Standard Protocols:

  • IEEE 802.1d
  • IEEE 802.1p
  • IEEE 802.1q
  • IEEE 802.1s
  • IEEE 802.1w
  • IEEE 802.3x
  • IEEE 802.3z
  • IEEE 802.3ab
  • IEEE 802.3ad
  • 1000BASE-X (GBIC)
  • 1000BASE-SX
  • 1000BASE-LX/LH
  • 1000BASE-ZX
  • CWDM 
Safety Compliance:
  • UL 1950
  • CSA C22.2 No.950
  • EN 60950
  • EN 60825-1
  • IEC 60950
  • IEC 60825-1
  • TS 001
  • CE marking
  • AS/NZS 3260
  • 21CFR1040 
EMC Compliance:
  • FCC Part 15 (CFR 47) Class A
  • VCCI
  • EN55022
  • EN55024
  • CISPR 22
  • CE marking
  • AS/NZS 3548

TECHNICAL SUPPORT
Get solutions or consultation from the technical team.