Optical Transceivers for Cisco N5548P-4N2248TP Switch

Cisco N5548P-4N2248TP Switch Overview

N5548P-4N2248TP belongs to the Cisco Catalyst Nexus 5000 Series Switches; these switches are ideal for traditional or fully automated data center deployments. The Cisco Nexus 5548P is a one-rack-unit. All ports are at the rear of the switches, simplifying cabling and reducing cable length. Cooling is front-to-back, supporting hot- and cold-aisle configurations that help increase cooling efficiency. The front panel includes status indicators and hot swappable power supplies and their power entry connections and cooling modules. All serviceable components are accessible from the front panel, allowing the switch to be serviced while in operation and without disturbing network cabling.

Cisco N5548P-4N2248TP Switch

Cisco N5548P-4N2248TP Switch Parameters

Device Type 
Switch - 32 ports - Managed - with 4x Cisco Nexus 2248TP GE Fabric Extender             
Enclosure Type
Rack-mountable 1U
Subtype
10 Gigabit Ethernet
Ports
32 x SFP+
Performance
Layer 2 throughput: 960 Gbps
MAC Address Table Size
16K entries
Remote Management Protocol
SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SMI-S, SSH-2, CLI
Features

Layer 2 switching, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast

Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol

(MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS),

Jumbo Frames support, Rapid Per-VLAN Spanning Tree Plus (PVRST+)

Compliant Standards
IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 801.1p
Power 
AC 120/230 V ( 50/60 Hz )
Power Redundancy 
Yes
Dimensions (WxDxH)
43.9 cm x 74.9 cm x 4.4 cm

Optical Transceivers for Cisco N5548P-4N2248TP Switch

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 10GBASE-SR, 10GBASE-LR, 10G SFP+ DAC Twinax Cable. For more information on these Cisco optical transceivers, please check the following table.

MFG Part number
Description 
Price
SFP-10G-SR
Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver 
US$16.00
SFP-10G-LR
Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver 
US$32.55
SFP-10G-SR-S
Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 850nm 300m 
US$16.00
SFP-10G-LR-S
Cisco SFP-10G-LR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 10km 
US$32.55
SFP-H10GB-CU1M
Cisco SFP-H10GB-CU1M Compatible 10G SFP+ DAC Twinax Cable (1-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU3M
Cisco SFP-H10GB-CU3M Compatible 10G SFP+ DAC Twinax Cable (3-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU5M
Cisco SFP-H10GB-CU5M Compatible 10G SFP+ DAC Twinax Cable (5-meter, passive, SFP+ to SFP+, 24AWG)

SFP-H10GB-ACU7M 
Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG)

SFP-H10GB-ACU10M
Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG)

Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco N5548P-4N2248TP switch is designed for data center environments with cut-through technology that enables consistent low-latency Ethernet solutions, with front-to-back cooling, and with data ports in the rear, bringing switching into close proximity with servers and making cable runs short and simple. This high quality Cisco switch works with a number of Gigabit Ethernet SFP optical transceivers. You can easily find these high quality fiber optic transceivers at very competitive rates on Cozlink. What makes this even better that Cozlink also offer you a wide range of patch cords, fiber optic pigtails and high speed cables to choose from and Cozlink also ensure that you get the same day shipping.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.