Optical Transceivers for Cisco WS-C2960S-48TS-L Switch

Cisco WS-C2960S-48TS-L Switch Overview

WS-C2960S-48TS-L belongs to the Cisco Catalyst 2960 S Series Switches; this is a fixed configuration access switch designed for fresh level business, mid-market, and branch office networks with high quality services supported by Cisco IOS LAN Lite Software. Cisco Catalyst 2960-S Series Switches WS-C2960S-48TS-L is an easy-to-use Layer 2 edge switch suits for enterprise, midmarket, and branch office networks with highly secure business operations, improved sustainability, borderless network experience and lower total cost of ownership.

Cisco WS-C2960S-48TS-L Switch

Cisco WS-C2960S-48TS-L Switch Parameters

Device Type 
Switch - 48 ports - Managed      
Enclosure Type 
Rack-mountable 1U
Subtype
Gigabit Ethernet
Ports 
48 x 10/100/1000 + 4 x SFP
Performance
Switching capacity : 176 Gbps ¦ Forwarding performance (64-byte packet size) : 77.4 Mpps
MAC Address Table Size 
8K entries 
Remote Management Protocol 
SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH
Features

Layer 2 switching, auto-sensing per device, dynamic IP address assignment , auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support,

auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast

Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking

Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Aggregation Control

Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN)

Compliant Standards 
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP) 
Power 
AC 120/230 V ( 50/60 Hz ) 
Dimensions (WxDxH) 
44.5 cm x 29.9 cm x 4.5 cm 
Weight
4.77 kg

Optical Transceivers for Cisco WS-C2960S-48TS-L Switch 

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000BASE-T, 1000BASE-SX, 1000Base-LX/LH, 1000BASE-ZX, 1000BASE-BX-D, 1000BASE-BX-U. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number
Description
Price
GLC-T 
Cisco GLC-T Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver 
US$13.02 
GLC-TE 
Cisco GLC-TE Transceiver Module Compatible 1000M SFP Copper 100m 
US$13.02 
GLC-SX-MM
Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m Transceiver 
US$6.00 
GLC-LH-SM 
Cisco GLC-LH-SM Compatible 1000Base-LX/LH SFP 1310nm 10km Transceiver 
US$7.00 
GLC-ZX-SM 
Cisco GLC-ZX-SM Compatible 1000BASE-ZX SFP 1550nm 70km Transceiver 
US$24.00
GLC-ZX-SMD
Cisco GLC-ZX-SMD Compatible 1000BASE-ZX SFP 1550nm 70km DOM Transceiver 
US$24.00
GLC-BX-D 
Cisco GLC-BX-D Compatible 1000BASE-BX-D SFP 1490nm-TX/1310nm-RX 10km DOM Transceiver
US$12.00 
GLC-BX-U
Cisco GLC-BX-U Compatible 1000BASE-BX-U SFP 1310nm-TX/1490nm-RX 10km DOM Transceiver 
US$9.00 
CWDM SFP 
1.25G CWDM SFP 1270~1450nm 120km LC DDM Optical Transceiver 
US$55.00 
GLC-SX-MMD 
Cisco GLC-SX-MMD Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver
US$6.00
GLC-LH-SMD
Cisco GLC-LH-SMD Compatible 1000Base-LX/LH SFP 1310nm 10km DOM Transceiver 
US$7.00
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco WS-C2960S-48TS-L includes new FlexStack switch stacking capability with 4 One GigabitEthernet uplink ports with Small Form-Factor Pluggable (SFP) providing business continuity and fast transition has high-performance with 20 Gbps of throughput, allowing ease of operation with single configuration and simplified switch upgrade. Cisco WS-C2960S-48TS-L switch provides 48 ports of Gigabit Ethernet desktop connectivity. This high quality Cisco switch works with a number of Gigabit Ethernet SFP optical transceivers. You can easily find these high quality fiber optic transceivers at very competitive rates on Cozlink. What makes this even better that Cozlink also offer you a wide range of patch cords, fiber optic pigtails and high speed cables to choose from and Cozlink also ensure that you get the same day shipping.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.