Optical Transceivers for Cisco WS-C2960S-24TD-L Switch

Cisco WS-C2960S-24TD-L Switch Overview

WS-C2960S-24TD-L belongs to the Cisco Catalyst 2960S Series Switches; it’s an ideal product for fresh level business, mid-market, and branch office networks with high quality services supported by Cisco IOS LAN Lite Software. The Cisco Catalyst 2960-S Series Switches WS-C2960S-24TD-L is a Layer 2 switch outstanding with its 2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP dual-purpose uplinks, with each dual-purpose uplink port has one port active at a time, for Gigabit Ethernet uplink flexibility, allowing use of either a copper or fiber uplink. WS-C2960S-24TD-L also provides 24 Ethernet 10/100/1000 switch ports, optional Cisco FlexStack stacking support and LAN Base image, which functions make this model an easy-to-use switch device.

The Cisco Catalyst 2960-S Series Switches WS-C2960S-24TD-L is a Layer 2 switch outstanding with its 2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP dual-purpose uplinks, with each dual-purpose uplink port has one port active at a time, for Gigabit Ethernet uplink flexibility, allowing use of either a copper or fiber uplink. WS-C2960S-24TD-L also provides 24 Ethernet 10/100/1000 switch ports, optional Cisco FlexStack stacking support and LAN Base image, which functions make this model an easy-to-use switch device.

The Cisco Catalyst 2960-S and 2960 Series are fixed-configuration access switches designed for enterprise, midmarket, and branch office networks to provide lower total cost of ownership. 

Cisco WS-C2960S-24TD-L Switch

Cisco WS-C2960S-24TD-L Switch Parameters

Device Type 

Switch - 24 ports - Managed                

Enclosure Type Rack-mountable 1U
Subtype Gigabit Ethernet
Ports 24 x 10/100/1000 + 2 x 10 Gigabit SFP+ 
Performance Switching capacity: 176 Gbps ¦ Forwarding performance (64-byte packet size): 65.5 Mpps
MAC Address Table Size 8K entries
Remote Management Protocol  SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH 
Features

Layer 2 switching, auto-sensing per device, dynamic IP address assignment, power over

Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN

support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support,

Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control,

Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP)

support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation

Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS),

PoE+,Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification,

Remote Switch Port Analyzer (RSPAN) 

Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
Power AC 120/230 V ( 50/60 Hz )
Dimensions (WxDxH)  44.5 cm x 29.9 cm x 4.5 cm 
Weight 4.3 kg

Optical Transceivers for Cisco WS-C2960S-24TD-L Switch

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 10GBASE-SR, 10GBASE-LRM, 10GBASE-LR, 10GBase-ER, 10GBASE-ZR/ZW, DAC Twinax Cable. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number  Description Price
SFP-H10GB-CU1M Cisco SFP-H10GB-CU1M Compatible 10G SFP+ DAC Twinax Cable (1-meter, passive, SFP+ to SFP+, 30AWG)  
SFP-H10GB-CU3M Cisco SFP-H10GB-CU3M Compatible 10G SFP+ DAC Twinax Cable (3-meter, passive, SFP+ to SFP+, 30AWG)   
SFP-H10GB-CU5M  Cisco SFP-H10GB-CU5M Compatible 10G SFP+ DAC Twinax Cable (5-meter, passive, SFP+ to SFP+, 24AWG)  
SFP-10G-SR  Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver US$16.00
SFP-10G-LRM Cisco SFP-10G-LRM Compatible 10GBASE-LRM SFP+ 1310nm 220m DOM Transceiver US$32.55
SFP-10G-LR Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver US$32.55
SFP-10G-ER Cisco SFP-10G-ER Compatible 10GBase-ER SFP+ 1550nm 40km Transceiver Module US$153.45
SFP-10G-SR-S Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 850nm 300m US$16.00
SFP-10G-LR-S Cisco SFP-10G-LR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 10km US$32.55
SFP-10G-ER-S Cisco SFP-10G-ER-S Transceiver Module Compatible 10G 10G SFP+ 1550nm 40km  US$153.45
SFP-10G-ZR  Cisco SFP-10G-ZR Compatible 10GBASE-ZR/ZW and OTU2e SFP+ 1550nm 80km DOM Transceiver  US$339.45
SFP-10G-ZR-S Cisco SFP-10G-ZR-S Transceiver Module Compatible 10G SFP+ Pluggable 1550nm 80km  US$339.45
DWDM SFP+ 10G SFP+ DWDM 40km Transceiver CH17~CH61 LC SM Duplex DDM Optical Module US$260.40
CWDM SFP+ 10G SFP+ CWDM 20km Transceiver 1270~1330nm LC SM Duplex DDM Optical Module  US$139.50
SFP-H10GB-CU1-5M Cisco SFP-H10GB-CU1-5M Compatible 10G SFP+ DAC Twinax Cable (1.5-meter, passive, SFP+ to SFP+, 30AWG)  
SFP-H10GB-CU2M Cisco SFP-H10GB-CU2M Compatible 10G SFP+ DAC Twinax Cable (2-meter, passive, SFP+ to SFP+, 30AWG)  
SFP-H10GB-CU2-5M Cisco SFP-H10GB-CU2-5M Compatible 10G SFP+ DAC Twinax Cable (2.5-meter, passive, SFP+ to SFP+, 30AWG)  
SFP-H10GB-ACU7M  Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG)   
SFP-H10GB-ACU10M  Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG)   
SFP-10G-AOC1M Cisco SFP-10G-AOC1M Compatible 10G SFP+ AOC (1-meter, SFP+ to SFP+)   
SFP-10G-AOC2M Cisco SFP-10G-AOC2M Compatible 10G SFP+ AOC (2-meter, SFP+ to SFP+)   
SFP-10G-AOC3M Cisco SFP-10G-AOC3M Compatible 10G SFP+ AOC (3-meter, SFP+ to SFP+)   
SFP-10G-AOC5M Cisco SFP-10G-AOC5M Compatible 10G SFP+ AOC (5-meter, SFP+ to SFP+)   
SFP-10G-AOC7M  Cisco SFP-10G-AOC7M Compatible 10G SFP+ AOC (7-meter, SFP+ to SFP+)  
SFP-10G-AOC10M Cisco SFP-10G-AOC10M Compatible 10G SFP+ AOC (10-meter, SFP+ to SFP+)  
GLC-SX-MM  Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m Transceiver US$6.00 
GLC-LH-SM Cisco GLC-LH-SM Compatible 1000Base-LX/LH SFP 1310nm 10km Transceiver US$7.00 
GLC-ZX-SM Cisco GLC-ZX-SM Compatible 1000BASE-ZX SFP 1550nm 70km Transceiver  US$24.00 
GLC-ZX-SMD Cisco GLC-ZX-SMD Compatible 1000BASE-ZX SFP 1550nm 70km DOM Transceiver  US$24.00 
GLC-BX-D  Cisco GLC-BX-D Compatible 1000BASE-BX-D SFP 1490nm-TX/1310nm-RX 10km DOM Transceiver  US$12.00
GLC-BX-U  Cisco GLC-BX-U Compatible 1000BASE-BX-U SFP 1310nm-TX/1490nm-RX 10km DOM Transceiver US$9.00 
CWDM SFP 1.25G CWDM SFP 1270~1450nm 120km LC DDM Optical Transceiver US$55.00 
GLC-SX-MMD Cisco GLC-SX-MMD Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver US$6.00
GLC-LH-SMD Cisco GLC-LH-SMD Compatible 1000Base-LX/LH SFP 1310nm 10km DOM Transceiver US$7.00 
GLC-EX-SMD  Cisco GLC-EX-SMD Compatible 1000BASE-EX SFP 1310nm 40km DOM Transceiver  US$12.00
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Product Details

The Cisco®Catalyst®2960-S and 2960 Series Switches are the leading Layer 2 edge, providing improved ease of use, highly secure business operations, improved sustainability, and a borderless network experience. The Catalyst 2960-S Series Switches include new FlexStack switch stacking capability with 1 and 10 Gigabit connectivity, and Power over Ethernet Plus (PoE+) with the Cisco Catalyst 2960 Series Switches offering Fast Ethernet access connectivity and PoE capabilities. The Cisco Catalyst 2960-S and 2960 Series are fixed-configuration access switches designed for enterprise, midmarket, and branch office networks to provide lower total cost of ownership. 

What's new for the Cisco Catalyst 2960-S Series Switches with LAN Base Software:

• 10 Gigabit Ethernet uplink flexibility with Small Form-Factor Pluggable Plus (SFP+), providing business continuity

• 24 ports of Gigabit Ethernet desktop connectivity 

• Cisco FlexStack stacking module with 20 Gbps of throughput, allowing ease of operation with single configuration and simplified switch upgrade 

• USB storage for file backup, distribution, and simplified operations

• A wide range of software features to provide ease of operation, highly secure business operations, sustainability, and a borderless network experience 

The Cisco 2960S Series is a 24-port switch that is designed for standard backbone Ethernet switching. All of the 24 Ethernet ports are capable of 1 Gbps connection speeds. The switch supports stacking, managed by Flexstack technology, enabling a full-duplex, 10 Gbps connection. This stack maxes with two connected switches.

Each switch includes either 2 Gigabit SFP ports with uplink support or 2 Ethernet ports that achieve speeds of up to 10 Gigabits.

The switch also benefits from EngergyWise architecture. This is a design element that makes it easy to monitor and control power consumption in a network, leading to better energy efficiency, lower power costs, improved equipment longevity, and better operating conditions.

Overall, it’s an ideal switch for mid-market uses, providing networking infrastructure for branch offices and comparable networks. You can build a reliable network off of a single switch (when user numbers allow for it), combining endpoint devices that may include servers, wireless access points, and anything else your network may require.

Summary

The Cisco WS-C2960S-24TD-L Switches due to its enhanced features is best utilized in office branch networks, in entry level businesses who are just starting their business operations or in mid markets business who do not possess an excessively large network. These switches are compatible with various Gigabit Ethernet SFP optical transceivers. All these fiber optic transceivers are available on Cozlink at really competitive prices. You can expect same day shipping on Cozlink. Not just optical transceivers, you can also find fiber optic pigtails and high speed cables for your choice on Cozlink.

TECHNICAL SUPPORT
Get solutions or consultation from the technical team.