All Cisco SFP-10G-SR’s information (Overview, List price, Specs, Datasheet PDF, Compatibil

Cisco SFP-10G-SR Overview

The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver, and it supports up to 400m link length when uses 4700Mhz KM MMF (OM3). The hot-swappable supported feature has no need to power off the device when plugs into an Ethernet SFP+ port of a Cisco switch. Cisco quality identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco. The Cisco 10GBASE SFP+ modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. 

Cisco SFP-10G-SR

Main Features

  • SFP+ transceiver module
  • 10 Gigabit Ethernet
  • 10GBase-SR
  • LC/PC multi-mode
  • up to 984 ft
  • 850 nm
  • for Catalyst Switch Module 3012
  • Switch Module 3110G
  • Switch Module 3110X; Nexus 5010

Cisco SFP-10G-SR List Price

Product 
List Price (USD)
 Description
SFP-10G-SR
 $ 995.00 
10GBASE-SR SFP Module

Cisco SFP-10G-SR Datasheet PDF

Cisco SFP-10G-SR Specs

Environmental Parameters  

Max Operating Temperature: 
158 °F 
Min Operating Temperature:
32 °F
Header

Brand:
Cisco
Compatibility:
PC
Manufacturer:
Cisco Systems
Packaged Quantity: 
1
Product Line:
Cisco
Interface Provided

Connector Qty: 
X 2 
Connector Type: 
LC/PC multi-mode
Qty:
1
Type:
Ethernet 10GBase-SR
Interface Required

Type: 
None
Networking

Cabling Type: 
Ethernet 10GBase-SR
Compliant Standards:
IEEE 802.3ae
Connectivity Technology: 
Wired
Data Link Protocol:
10 Gigabit Ethernet
Data Transfer Rate:
10 Gbps
Form Factor: 
Plug-in module
Interface Type:
SFP+
Max Transfer Distance:
984 ft
Optical Wave Length:
 850 nm
Type: 
SFP+ transceiver module
Power Device

Type:
 None
Service  

Support Details Full Contract Period:
90 days
Support Details Type: 
Limited warranty
Slot Provided

Type:
None 
Slot Required

Total Qty: 
1
Type:
SFP+
Dimensions & Weight

Depth: 
2.2 in
Height:
0.4 in
Weight:
 2.65 oz
Width: 
 0.5 in
Service & Support

 Type: 
90 days warranty
Connectors (for SD)

 Left Connector Type:
LC/PC multi-mode

Cisco SFP-10G-SR Compatibility matrix 

Cisco SFP-10G-SR is supported on a wide range of Cisco equipment.

Cisco ASR 9000 A9K-MPA-8X10GE

Cisco 6000 NC6-60X10GE-L-S

Cisco Nexus 3000 N3K-C31128PQ-10GE 

Cisco WS-C2960S-24PD-L

Cisco WS-C3560X-48P

Cisco WS-C3650-48TQ

Cisco 6500 WS-X6708-10G-3C

Cisco C6800IA-48FPDR

Cisco 6000 NCS-6008

Cisco Nexus 3000 N3K-C3548P-10G

Cisco ASR-9000V-DC-E

Cisco Nexus 2000 N2K-C2248TP-E-1GE

Cisco Nexus 5000 N5K- 5672UP

Cisco Nexus 9000 N9K-X9564PX 

Cisco WS-C2960XR-24TD-I

Cisco ASR 9000 A9K-RSP440-SE

Cisco WS-C3850-24XS

Cisco WS-C4500X-16SFP+

Cisco ASR 9000 A9K-16T/8-B

Cisco ASR 9000 ASR-9922-RP-SE

Cisco Nexus 5000 N5K-C5548UP-FA

Cisco Nexus 7000 N7K-M108X2-12

Cisco WS-C3650-48PD

Cisco WS-C3850-16XS  

Cisco N10-E0600 Cisco 6500 VS-S2T-10G

Cisco WS-C3750X-48PF

Cisco 4500 WS-X45-SUP6L-E

Cisco C6800-16P10G(-XL)

Cisco 6800 C6832-X-LE 

Can We Interconnect SFP, SFP+, XFP, X2 and XENPAK?

1. Can we interconnect SFP-10G-SR to XENPAK-10GB-SR or X2-10GB-SR?
The answer is yes. For this problem, you just need the correct optic on each side. If your optics are singlemode you need singlemode patch cord. If your optics are multi-mode then you need multi-mode patch cord. SFP-10G-SR, XENPAK-10GB-SR and X2-10GB-SR are all multi-mode optics, so a multi-mode fiber can solve this problem.
2. Can LC-SC patch cord connect X2-10GB-SR between SFP-10G-SR?
Yes, it’ll work fine as long as your fiber patch cord is multi-mode. Actually, the SFP+ requires LC connector but the X2 may require a SC connector. So when connect SFP-10G-SR to X2-10GB-SR, we must use a LC-SC patch cable (LC connector on one fiber end, SC connector on the other fiber end).
3. Is it possible to connect X2-10GB-LR to SFP-10G-SR?
The answer is not possible. The Cisco X2-10GB-LR module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). However, the Cisco SFP-10G-SR module supports a link length of 300m on OM3 multi-mode fiber (MMF,OM3) and 400m on OM4 multi-mode fiber (MMF,OM4). Actually, you need to use modules with the same wavelengths, i. e. SR to SR or LR to LR.
4. Can we connect SFP-10G-SR to GLC-SX-MM?
The SFP-10G-SR is 10 Gbps only. The GLC-SX-MM is 1 Gbps only. This question means can we force SFP-10G-SR to use 1Gbps speed?  This is a very common question and the response will always be the same. The answer is NO. Because the SFP-10G-SR is 10 Gbps only. It runs at 10 Gbps link rate and no other speed. GBIC, SFP, X2, QSFP, CFP modules will only negotiate to one speed and one speed only. You cannot interconnect them.

All the collected  information above belongs to original author, if infringement, please contact us immediately, we will solve this  immediately.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.