Optical Transceivers for Cisco N9K-C9396PX= Switch

Cisco N9K-C9396PX= Switch Overview

N9K-C9396PX= belongs to the Cisco Catalyst Nexus 9000 Series Switches; these switches are ideal for traditional or fully automated data center deployments. The Cisco Nexus 9000 series switches include both modular and fixed-port switches that are designed to overcome these challenges with a flexible, agile, low-cost, application centric infrastructure (ACI). The Cisco Nexus 9300 platform is composed of fixed-port switches designed for top-of-rack (ToR) and middle-of-row (MoR) deployment in data centers that support enterprise applications, service provider hosting, and cloud computing environments. The Cisco Nexus 9396PX switch is a two-rack-unit (RU) switch that supports 960 Gbps of bandwidth across 48 fixed 10-Gbps SFP+ ports and 12 fixed 40-Gbps QSFP+ ports. The 40-Gbps ports are provided on an uplink module that can be serviced and replaced by the user.

Cisco N9K-C9396PX= Switch

Cisco N9K-C9396PX= Switch Parameters

Device Type 
Switch - 48 ports - L3 - Managed               
Enclosure Type
Desktop, rack-mountable 2U
Subtype
40 Gigabit Ethernet
Ports
48 x 1 Gigabit / 10 Gigabit SFP+ + 12 x 40 Gigabit QSFP+
Performance 
Bandwidth: 96 Gbps  
Capacity
Longest prefix match (LPM) entries (IPv4): 16000 ¦ Host table entries (IPv4): 88000 ¦ MAC addresses: 160000 ¦ IPv4 routes (Multicast): 32000 ¦ Virtual interfaces (VLANs): 4096
Remote Management Protocol
SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2
Features

Flow control, modular design, load balancing, VLAN support, Weighted Round Robin (WRR) queuing,

Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Weighted Random Early

Detection (WRED), Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support,

Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of

Service (QoS), RADIUS support, RDMA support, LLDP support, Link Aggregation Control Protoco

l (LACP), DiffServ Code Point (DSCP) support

Compliant Standards
IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 801.1p, IEEE 802.3ba
Power Redundancy 
Yes
Dimensions (WxDxH)
44.5 cm x 57.1 cm x 8.9 cm

Optical Transceivers for Cisco N9K-C9396PX= Switch 

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 40G QSFP+, AOC, 40G QSFP+ SR, 40G QSFP+ CSR4, 40G QSFP+ LR. For more information on these Cisco optical transceivers, please check the following table.

MFG Part number
Description 
Price
SFP-10G-SR
Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver 
US$16.00 
SFP-10G-LR
Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver 
US$32.55
SFP-10G-ER
Cisco SFP-10G-ER Compatible 10GBase-ER SFP+ 1550nm 40km Transceiver Module 
US$153.45
SFP-10G-ZR
Cisco SFP-10G-ZR Compatible 10GBASE-ZR/ZW and OTU2e SFP+ 1550nm 80km DOM Transceiver 
US$339.45 
SFP-10G-SR-S 
Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 850nm 300m
US$16.00
SFP-10G-LR-S
Cisco SFP-10G-LR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 10km 
US$32.55
SFP-10G-ER-S 
Cisco SFP-10G-ER-S Transceiver Module Compatible 10G 10G SFP+ 1550nm 40km 
US$153.45
 SFP-10G-ZR-S 
Cisco SFP-10G-ZR-S Transceiver Module Compatible 10G SFP+ Pluggable 1550nm 80km
US$339.45
SFP-H10GB-CU1M
Cisco SFP-H10GB-CU1M Compatible 10G SFP+ DAC Twinax Cable (1-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU1-5M
Cisco SFP-H10GB-CU1-5M Compatible 10G SFP+ DAC Twinax Cable (1.5-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU2M 
Cisco SFP-H10GB-CU2M Compatible 10G SFP+ DAC Twinax Cable (2-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU2-5M
Cisco SFP-H10GB-CU2-5M Compatible 10G SFP+ DAC Twinax Cable (2.5-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU3M
Cisco SFP-H10GB-CU3M Compatible 10G SFP+ DAC Twinax Cable (3-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU5M
Cisco SFP-H10GB-CU5M Compatible 10G SFP+ DAC Twinax Cable (5-meter, passive, SFP+ to SFP+, 24AWG) 

SFP-H10GB-ACU7M
Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG)

SFP-H10GB-ACU10M
Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG)

SFP-10G-AOC1M 
Cisco SFP-10G-AOC1M Compatible 10G SFP+ AOC (1-meter, SFP+ to SFP+)

SFP-10G-AOC2M
Cisco SFP-10G-AOC2M Compatible 10G SFP+ AOC (2-meter, SFP+ to SFP+) 

SFP-10G-AOC3M
Cisco SFP-10G-AOC3M Compatible 10G SFP+ AOC (3-meter, SFP+ to SFP+) 

SFP-10G-AOC5M
Cisco SFP-10G-AOC5M Compatible 10G SFP+ AOC (5-meter, SFP+ to SFP+)

SFP-10G-AOC7M 
Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG) 

SFP-10G-AOC10M
Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG)

SFP-10G-LRM
Cisco SFP-10G-LRM Compatible 10GBASE-LRM SFP+ 1310nm 220m DOM Transceiver 
US$32.55
DWDM SFP+
10G SFP+ DWDM 40km Transceiver CH17~CH61 LC SM Duplex DDM Optical Module
US$260.24 
QSFP-4SFP10G-CU1M
1m Cisco QSFP-4SFP10G-CU1M Compatible 40G QSFP+ to 4x10G SFP+ Passive Direct Attach Copper Breakout Cable

QSFP-4SFP10G-CU3M
 3m Cisco QSFP-4SFP10G-CU3M Compatible 40G QSFP+ to 4x10G SFP+ Passive Direct Attach Copper Breakout Cable

QSFP-4SFP10G-CU5M
5m Cisco QSFP-4SFP10G-CU5M Compatible 40G QSFP+ to 4x10G SFP+ Passive Direct Attach Copper Breakout Cable 

QSFP-4X10G-AC7M 
Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 7-meter, active 

QSFP-4X10G-AC10M 
Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 10-meter, active 

SFP-10G-BXD-I 
Cisco SFP-10G-BXD-I Transceiver Module Compatible 10G BIDI SFP+ 1330nm TX/1270nm RX 10km 
US$60.45
SFP-10G-BXU-I 
Cisco SFP-10G-BXU-I Transceiver Module Compatible 10G WDM BIDI SFP+ 1270nm TX/1330nm RX 10km
US$60.45 
CWDM SFP+
10G SFP+ CWDM 20km Transceiver 1270~1330nm LC SM Duplex DDM Optical Module 
US$139.50
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco N9K-C9396PX= switch is high-density, nonblocking, low-power-consuming switches designed for ToR, MoR, or EoR deployment in enterprise data centers, service provider facilities, and large virtualized and cloud computing environments. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.