- Related articles
- Optical Transceivers for Cisco N9K-C9372PX-E Switch
- Optical Transceivers for Cisco WS-CBS3130X-S Switch
- Optical Transceivers for Cisco WS-C3560CG-8TC-S Switch
- What Is Internal Ethernet Card?
- Optical Transceivers for Cisco WS-C3650-24PS-L Switch
- What Condition is Required to Enable Layer 3 Switching?
- All Cisco ONS-SE-Z1's information (List price, Specs, Datasheet PDF)
- All Cisco MFEBX1's information (Specs, Datasheet PDF, Compatibility matrix)
- Optical Transceivers for Cisco SG200-26FP-EU Switch
- All Cisco DS-X2-FC10G-SR's information (List price, Specs, Datasheet PDF, Compatibility ma
Cisco WS-C2960-48PST-S Switch Overview
WS-C2960-48PST-S belongs to the Cisco Catalyst 2960-C Series Switches; its enhanced features is best utilized in office branch networks, in entry level businesses who are just starting their business operations or in mid markets business who do not possess an excessively large network. Cisco Catalyst 2960 series switches are fixed-configuration, standalone switches that provide desktop Fast Ethernet connectivity for entry-level wiring closet and small branch-office networks. These switches simplify the migration from non-intelligent hubs and unmanaged switches to a fully scalable managed network. Cisco Catalyst 2960 series switches have lower cost of ownership with features such as intelligent switch configuration using Auto Smart Ports, installation with Auto Install and enhanced troubleshooting to facilitate ease of use.
Cisco WS-C2960-48PST-S Switch Parameters
Device Type | Switch - 48 ports - Managed |
Enclosure Type | Rack-mountable 1U |
Subtype | Fast Ethernet |
Ports | 48 x 10/100 (PoE) + 2 x SFP + 2 x 10/100/1000 |
Power Over Ethernet (PoE) | PoE |
Performance | Switching capacity: 16 Gbps ¦ Forwarding performance (64-byte packet size): 13.3 Mpps |
MAC Address Table Size | 8K entries |
Remote Management Protocol | SNMP 1, SNMP 2, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH-2 |
Features | Layer 2 switching, auto-sensing per device, DHCP support, power over Ethernet (PoE), auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP) |
Power | AC 120/230 V ( 50/60 Hz ) |
Dimensions (WxDxH) | 44.5 cm x 33.1 cm x 4.4 cm |
Weight | 5.45 kg |
Optical Transceivers for Cisco WS-C2960-48PST-S Switch
MFG Part number | Description | Price |
GLC-GE-100FX | Cisco GLC-GE-100FX Compatible 100BASE-FX SFP 1310nm 2km Transceiver for Gigabit Ethernet SFP Ports | US$6.98 |
GLC-FE-100FX | Cisco GLC-FE-100FX Compatible 100BASE-FX SFP 1310nm 2km DOM Transceiver | US$6.98 |
GLC-FE-100LX | Cisco GLC-FE-100LX Compatible 100BASE-LX10 SFP 1310nm 10km Transceiver | US$6.98 |
GLC-FE-100BX-D | Cisco GLC-FE-100BX-D Compatible 100BASE-BX-D SFP 1550nm-TX/1310nm-RX 10km DOM Transceiver | US$9.77 |
GLC-FE-100BX-U | Cisco GLC-FE-100BX-U Compatible 100BASE-BX-U SFP 1310nm-TX/1550nm-RX 10km DOM Transceiver | US$8.84 |