How to determine what types of optical transceivers for Cisco switches?

Cisco ME-3400-24TS-A

Cisco ME 3400-24TS AC with 24 Ethernet 10/100 ports, two SFP uplinks, and an AC power supply
24 Ethernet 10/100 ports
2 SFP-based Gigabit Ethernet and 100BASE-X ports
AC power supply
6.5-mpps forwarding rate
1-RU multilayer switch
Ethernet access switch for the Metro Ethernet market
3 Cisco IOS Software feature image options (METROBASE, METROACCESS, and METROIPACCESS)

CiscoME 3400-24TS. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: Fast Ethernet (10/100), Basic switching RJ-45 Ethernet ports quantity: 24. Full duplex. MAC address table: 8000 entries, Switching capacity: 8.8 Gbit/s. Networking standards: IEEE 802.1ag, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE.... Rack mounting, Form factor: 1U

Cisco® ME 3400 Series Ethernet Access Switches are a series of next-generation Layer 2 and Layer 3 customer-located devices for service providers. Its design is based on the experience learned from today's most widely deployed access switches, the Cisco Catalyst® 2950 and 3550 Series. With service provider-friendly hardware and mission-specific software, the Cisco ME 3400 Series is the first Cisco access switch family optimized for both Ethernet-to-the-Home (ETTH) triple-play services and Ethernet-to-the-Business (ETTB) VPN services. It provides a complete security solution for Metro Ethernet access that includes subscriber, switch, and network protection. The Cisco ME 3400 Series supports multiple software images to provide a "pay-as-you-grow" deployment model. With service breadth spanning triple-play and Layer 2 and Layer 3 VPN services, lower total cost of ownership (TCO) and operating expenses can be achieved from a single ETTH and ETTB access solution. - 24 Ethernet 10/100 ports. - 2 SFP-based Gigabit Ethernet and 100BASE-X ports. - AC power supply. - 6.5-mpps forwarding rate. - 1-RU multilayer switch. - Ethernet access switch for the Metro Ethernet market. - 3 Cisco IOS Software feature image options (METROBASE, METROACCESS, and METROIPACCESS).

Scalable Network Expansion

To expand the network on the ME-3400-24TS-A Cisco 24-Ports 100MB Ethernet 2-Ports 1GB SFP Switch, there are a few options available:

• Add more switches to the network: By adding more switches to the network, you can increase the number of available ports and expand the network to cover more areas. This can be done by connecting the new switch to an existing switch using a fiber optic cable or a copper cable.

• Add more SFP modules: The switch has 2 SFP ports that can be used to connect to other switches or devices using fiber optic cables. By adding more SFP modules, you can increase the number of available ports and expand the network to cover more areas.

• Add more VLANs: VLANs (Virtual Local Area Networks) allow you to segment the network and create separate virtual networks. By adding more VLANs, you can increase the number of available ports and expand the network to cover more areas.

• Upgrade to a higher-speed switch: If your network is growing and the current switch is not able to handle the increased traffic, you may need to upgrade to a higher-speed switch with more ports and faster speeds. This will allow you to expand the network and handle more traffic.

• Use Cisco Meraki devices: Cisco Meraki devices can be used to expand the network and provide additional features such as wireless access points and cloud management.

Compatible Accessories and Upgrades

• Cisco SFP-10G-SR: This is a 10GBASE-SR SFP+ transceiver module that can be used to upgrade the 1GB SFP ports on the ME-3400-24TS-A switch to 10GBASE-SR.

• Cisco SFP-10G-LR: This is a 10GBASE-LR SFP+ transceiver module that can be used to upgrade the 1GB SFP ports on the ME-3400-24TS-A switch to 10GBASE-LR.

• Cisco SFP-H10GB-CU3M: This is a 10G SFP+ copper cable that can be used to connect the ME-3400-24TS-A switch to other 10G devices over short distances.

• Cisco SFP-H10GB-CU1M: This is a 1 meter 10G SFP+ copper cable that can be used to connect the ME-3400-24TS-A switch to other 10G devices over short distances.

• Cisco StackWise-480: This is a stacking module that can be used to stack multiple ME-3400-24TS-A switches together to form a single logical switch with increased port density and redundancy.

• Cisco Power over Ethernet (PoE) Upgrade: This upgrade can be used to add PoE capabilities to the ME-3400-24TS-A switch, allowing it to power devices such as IP phones and wireless access points.

• Cisco Network Management Software: This software can be used to manage and monitor the ME-3400-24TS-A switch, including monitoring switch performance, configuring switch settings, and troubleshooting network issues.

Management and Security Features

The ME-3400-24TS-A Cisco 24-ports 100MB Ethernet 2-ports 1GB SFP switch offers a range of management and security features to ensure the smooth operation and protection of your network. Some of the key features include:

• Cisco IOS Software: The switch runs on Cisco IOS Software, which provides a range of management and security features, including advanced QoS, VLANs, and access control lists (ACLs).

• Web-based management: The switch can be managed via a web-based interface, allowing for easy configuration and monitoring of the network.

• SNMP support: The switch supports SNMP, allowing for remote monitoring and management of the network.

• Port security: The switch supports port security, which allows you to configure specific security settings for each port, such as limiting the number of MAC addresses that can be learned on a port.

• Access control lists (ACLs): The switch supports ACLs, which allow you to control access to the network by filtering traffic based on specific criteria, such as IP address or protocol.

• Quality of Service (QoS): The switch supports QoS, which allows you to prioritize different types of traffic to ensure that critical applications receive the bandwidth they need.

• Link aggregation: The switch supports link aggregation, which allows you to bundle multiple ports together to increase bandwidth and provide redundancy.

• SFP ports: The switch has two 1GB SFP ports, which allow for the connection of fiber optic cables for longer distance connections.

General Information

• Manufacturer Cisco Systems, Inc

• Manufacturer Part Number ME-3400-24TS-A

• Brand Name Cisco

• Product Series 3400

• Product Model ME 3400

• Product Name ME 3400 Ethernet Access Switch

• Product Type Layer 3 Switch

Interfaces/Ports

• Total Number of Network Ports 24

• Number of Network (RJ-45) Ports 24

• Port/Expansion Slot Details 24 x Fast Ethernet Network

• Port/Expansion Slot Details 2 x Fast Ethernet Expansion Slot

Media & Performance

• Media Type Supported Twisted Pair

• Twisted Pair Cable Standard Category 5

• Ethernet Technology Fast Ethernet

• Network Technology 10/100Base-TX

I/O Expansions

• Number of Total Expansion Slots 2

• Expansion Slot Type SFP

• Number of SFP Slots 2

Network & Communication

• Layer Supported 3

• Management & Protocols

• Manageable Yes

Management-

• SNMP versions 1, 2, and 3

• MIBs Support

Memory

• Standard Memory 128 MB

• Memory Technology DRAM

• Flash Memory 32 MB

Reliability

• MTBF 391823 Hour

• Power Description

• Input Voltage 110 V AC

• Input Voltage 220 V AC

•  

Summary