Optical Transceivers for Cisco WS-C3650-48FS-S Switch

Cisco WS-C3650-48FS-S Switch Overview

WS-C3650-48FS-S belongs to the Cisco Catalyst 3650 Series Switches, it widely used in the campus local area network (LAN) access. Cisco Catalyst WS-C3650-48FS-S is the next generation enterprise-level standalone with stackable option switch with IP Base image. WS-C3650-48FS-S has 48 Gigabit Ethernet POE+ ports with 4 fixed 1G SFP uplink ports and provides fully convergence between wired and wireless capacity on a single platform. Cisco StackWise technology creates high scalability and resilient unified system with up to 9 switches stacking in order to simplify network management. IP Base feature set enables wireless controller functionality for supporting up to 25 wireless APs and 1000 wireless connections (AP licenses purchase separately). For stacking purpose, stack modules are required; in addition, IP base feature set can only stack with other 3650 series in IP Base feature set, in order to stack with LAN base feature set, IP base need to configure in LAN base feature set (Stack module purchase separately). Flexible Netflow monitors the network traffic flows to help identify the threat of network. Cisco Energy-Efficient provides intelligence power management solution which enables power setting on an individual port to reduce power consumption.

Cisco WS-C3650-48FS-S Switch

Cisco WS-C3650-48FS-S Switch Parameters

Device Type 
Switch - 48 ports - L3 - Managed - stackable              
Enclosure Type
Desktop, rack-mountable 1U 
Subtype
Gigabit Ethernet
Ports
48 x 10/100/1000 (PoE+) + 4 x SFP
Power Over Ethernet (PoE) 
PoE+
PoE Budget 
775 W
Performance
Switching capacity: 176 Gbps ¦ Forwarding performance: 130.95 Mpps
Capacity 
IPv4 routes: 24000 ¦ NetFlow entries: 48000 ¦ Virtual interfaces (VLANs): 4000 ¦ Switched virtual interfaces (SVIs): 1000 
MAC Address Table Size
32000 entries
Jumbo Frame Support
9198 bytes
Routing Protocol 
RIP-1, RIP-2, EIGRP, static IP routing, RIPng
Remote Management Protocol 
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH, CLI
Features 

ARP support, trunking, VLAN support, IGMP snooping, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support,

DHCP snooping, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, MLD snooping,

Dynamic ARP Inspection (DAI), EIGRP Stub Routing, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Link Aggregation

Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Flexible NetFlow (FNF)   

Compliant Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at
Power 
AC 120/230 V ( 50/60 Hz ) 
Power Redundancy
Optional 
Dimensions (WxDxH) 
44.5 cm x 48.6 cm x 4.4 cm
Weight 
7.8 kg

Optical Transceivers for Cisco WS-C3650-48FS-S Switch

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000BASE-T, 1000Base-LX/LH, 1000BASE-SX, 1000BASE-ZX, 1000BASE-BX-D, 1000BASE-BX-U. For more information on these Cisco optical transceivers, please check the following table.

MFG Part number 
Description 
Price 
GLC-T
Cisco GLC-T Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver
US$13.02
GLC-TE 
Cisco GLC-TE Transceiver Module Compatible 1000M SFP Copper 100m 
US$13.02
GLC-LH-SM
Cisco GLC-LH-SM Compatible 1000Base-LX/LH SFP 1310nm 10km Transceiver 
US$7.00
GLC-LH-SMD 
Cisco GLC-LH-SMD Compatible 1000Base-LX/LH SFP 1310nm 10km DOM Transceiver
US$7.00
GLC-SX-MM
Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m Transceiver 
US$6.00
GLC-SX-MMD
Cisco GLC-SX-MMD Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver
US$6.00 
GLC-EX-SMD1
Cisco Systems GLC-EX-SMD compatible Industrial 1 Gigabit EX SFP Transceiver | 40km SM 1310nm

GLC-ZX-SM
Cisco GLC-ZX-SM Compatible 1000BASE-ZX SFP 1550nm 70km Transceiver
US$24.00 
GLC-ZX-SMD 
Cisco GLC-ZX-SMD Compatible 1000BASE-ZX SFP 1550nm 70km DOM Transceiver
US$24.00
GLC-BX-D 
Cisco GLC-BX-D Compatible 1000BASE-BX-D SFP 1490nm-TX/1310nm-RX 10km DOM TransceiverUS$12.00
GLC-BX-U
Cisco GLC-BX-U Compatible 1000BASE-BX-U SFP 1310nm-TX/1490nm-RX 10km DOM Transceiver 
US$9.00
CWDM SFP
1.25G CWDM SFP 1270~1450nm 120km LC DDM Optical Transceiver 
US$55.00
SFP-GE-S
Cisco SFP-GE-S Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver 
US$6.00 
SFP-GE-L 
Cisco SFP-GE-L Compatible 1000BASE-LX/LH SFP 1310nm 10km DOM Transceiver 
US$7.00
SFP-GE-T
Cisco SFP-GE-T Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver 
US$13.02
SFP-GE-Z
Cisco SFP-GE-Z Compatible 1000BASE-ZX SFP 1550nm 70km DOM Transceiver 
US$24.00
DWDM SFP 
1.25G DWDM 80km SFP Transceiver 1528~1564nm LC SM Duplex DDM Optical Module
US$186.00
GLC-BX40-D-I
Cisco GLC-BX40-D-I Transceiver Module Compatible 1.25G SFP BIDI 1550nm TX/1310nm RX 40km
US$22.32
GLC-BX40-DA-I
Cisco Systems GLC-EX-SMD compatible Industrial 1 Gigabit EX SFP Transceiver | 40km SM 1310nm

GLC-BX40-U-I
Cisco GLC-BX40-U-I Transceiver Module 1000BASE-BX 40Compatible 1.25G WDM SFP 1310nm TX/1550nm RX 40km 
US$16.74 
 GLC-BX80-D-I 
Cisco Systems GLC-BX80-D-I compatible 1 Gigabit Bidi SFP Transceiver | 80km TX 1570nm / RX 1490nm

GLC-BX80-U-I
 Cisco Systems GLC-BX80-U-I compatible Industrial 1 Gigabit Bidi SFP Transceiver | 120km TX 1510nm / RX 1570nm

Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 

2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6

3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco WS-C3650-48FS-S is the next generation of enterprise-class standalone and stackable access-layer switches that provide the foundation for full convergence between wired and wireless on a single platform. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.

TECHNICAL SUPPORT
Get solutions or consultation from the technical team.