- Related articles
- What is X2 transceiver?
- The Difference between SFP+ and X2
- The difference between PCI and PCI Express
- The difference between integrated network card and external network card
- All Cisco SFP-OC48-IR1's information (List price, Specs, Datasheet PDF, Compatibility matr
- All Cisco ONS-GC-GE-SX's information (List price, Specs, Datasheet PDF, Compatibility matr
- Optical Transceivers for Cisco WS-C3560E-48PD-S Switch
- All Cisco CWDM-GBIC-1510's information (List price, Specs, Datasheet PDF, Compatibility ma
- Ways to Use PCMCIA Network Card Slot?
- Apply to 100BASE-ZX Standard Optical Transceiver Models
Cisco N3K-C3064PQ-10GX Switch Overview
N3K-C3064PQ-10GX belongs to the Cisco Catalyst Nexus 3100 Series Switches; these switches are ideal for traditional or fully automated data center deployments. The Cisco Nexus 3064 switch is a high-performance, high-density, ultra-low-latency Ethernet switch. This compact one-rack-unit (1RU) form factor 10 Gigabit Ethernet switch provides line-rate layer 2 and layer 3 switching. Cisco Nexus 3064 is a true PHY-less switch that is optimized for low latency and low power consumption. Cisco Nexus 3064 is well suited for financial co-location deployments that require support for comprehensive unicast and multicast routing protocol features at ultra-low latencies.
Cisco N3K-C3064PQ-10GX Switch Parameters
Device Type | Switch - 48 ports - L3 - Managed |
Enclosure Type | Rack-mountable 1U |
Subtype | 10 Gigabit Ethernet |
Ports | 48 x SFP+ + 4 x QSFP+ (breakout compatible) |
Performance | Switching capacity: 1.28 Tbps ¦ Forwarding performance: 950 Mpps |
Capacity | Virtual interfaces (VLANs): 4096 ¦ Multiple Spanning Tree Protocol instances: 64 ¦ Rapid Spanning Tree Protocol instances: 512 ¦ ACL entries (ingress): 2000 ¦ ACL entries (egress): 1000 ¦ OSPF routes: 256 |
MAC Address Table Size | 128K entries |
Jumbo Frame Support | 9216 bytes |
Routing Protocol | OSPF, RIP-2, IGMPv2, HSRP, VRRP, OSPFv2, PIM-SM, IGMPv3, OSPFv3, PIM-SSM, MSDP, static IPv4 routing, static IPv6 routing, ECMP, Bidirectional Forwarding Detection (BFD), CIDR |
Remote Management Protocol | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI |
Features | BOOTP support, trunking, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Weighted Random Early Detection (WRED), sFlow, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Dynamic ARP Inspection (DAI), front to back airflow, EIGRP Stub Routing, STP Root Guard, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), DHCP relay, Strict Priority Queuing (SPQ), GRE tunneling, NTP time synchronisation, 9MB packet buffer, STP PortFast, Class of Service (CoS), Virtual PortChannel (vPC) technology, Precision Time Protocol (PTP), DiffServ Code Point (DSCP) support |
Compliant Standards | IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3an, IEEE 802.3ba, IEEE 1588-2008 |
Power | AC 120/230 V ( 50/60 Hz ) |
Power Redundancy | Yes |
Dimensions (WxDxH) | 43.9 cm x 50.5 cm x 4.4 cm |
Weight | 9.3 kg |
Optical Transceivers for Cisco N3K-C3064PQ-10GX Switch
Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 10GBASE-SR, 10GBASE-LR, 10GBase-ER, 10GBASE-ZR/ZW, 10G SFP+ DAC Twinax Cable, 10G SFP+ AOC. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number | Description | Price |
SFP-10G-SR | Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver | US$16.00 |
SFP-10G-LR | Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver | US$32.55 |
SFP-10G-ER | Cisco SFP-10G-ER Compatible 10GBase-ER SFP+ 1550nm 40km Transceiver Module | US$153.45 |
SFP-10G-ZR | Cisco SFP-10G-ZR Compatible 10GBASE-ZR/ZW and OTU2e SFP+ 1550nm 80km DOM Transceiver | US$339.45 |
SFP-10G-SR-S | Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 850nm 300m | US$16.00 |
SFP-10G-LR-S | Cisco SFP-10G-LR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 10km | US$32.55 |
SFP-10G-ER-S | Cisco SFP-10G-ER-S Transceiver Module Compatible 10G 10G SFP+ 1550nm 40km | US$153.45 |
SFP-10G-ZR-S | Cisco SFP-10G-ZR-S Transceiver Module Compatible 10G SFP+ Pluggable 1550nm 80km | US$339.45 |
SFP-H10GB-CU1-5M | Cisco SFP-H10GB-CU1-5M Compatible 10G SFP+ DAC Twinax Cable (1.5-meter, passive, SFP+ to SFP+, 30AWG) | |
SFP-H10GB-CU2M | Cisco SFP-H10GB-CU2M Compatible 10G SFP+ DAC Twinax Cable (2-meter, passive, SFP+ to SFP+, 30AWG) | |
SFP-H10GB-CU2-5M | Cisco SFP-H10GB-CU2-5M Compatible 10G SFP+ DAC Twinax Cable (2.5-meter, passive, SFP+ to SFP+, 30AWG) | |
SFP-H10GB-CU5M | Cisco SFP-H10GB-CU5M Compatible 10G SFP+ DAC Twinax Cable (5-meter, passive, SFP+ to SFP+, 24AWG) | |
SFP-H10GB-ACU7M | Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG) | |
SFP-H10GB-ACU10M | Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG) | |
SFP-10G-AOC1M | Cisco SFP-10G-AOC1M Compatible 10G SFP+ AOC (1-meter, SFP+ to SFP+) | |
SFP-10G-AOC2M | Cisco SFP-10G-AOC2M Compatible 10G SFP+ AOC (2-meter, SFP+ to SFP+) | |
SFP-10G-AOC3M | Cisco SFP-10G-AOC3M Compatible 10G SFP+ AOC (3-meter, SFP+ to SFP+) | |
SFP-10G-AOC5M | Cisco SFP-10G-AOC5M Compatible 10G SFP+ AOC (5-meter, SFP+ to SFP+) | |
SFP-10G-AOC7M | Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG) | |
SFP-10G-AOC10M | Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG) |
How to determine what types of optical transceivers for Cisco switches?
1. Finding the corresponding optical module compatibility matrix via Cisco official website.
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.
Summary
The Cisco N3K-C3064PQ-10GX switch supports both forward and reversed airflow schemes with AC and DC power inputs. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.