Optical Transceivers for Cisco WS-C2960+48PST-S Switch

Cisco WS-C2960+48PST-S Switch Overview

WS-C2960+48PST-S belongs to the Cisco Catalyst 2960 Series Switches; its Fast Ethernet switches that provide enterprise-class Layer 2 switching for branch offices, conventional workspaces, and infrastructure applications. Cisco Catalyst WS-C2960+48PST-S is a LAN Lite switch that provides 48 x 10/100 PoE Ethernet ports, 2 x 1000BT and 2 x SFP uplink interfaces.

Cisco WS-C2960+48PST-S Switch

Cisco WS-C2960+48PST-S Switch Parameters

Device Type 
Switch - 48 ports - Managed       
Enclosure Type 
Rack-mountable 1U 
Subtype 
Fast Ethernet 
Ports 
48 x 10/100 (PoE) + 2 x Gigabit SFP + 2 x 10/100/1000 
Power Over Ethernet (PoE) 
PoE
PoE Budget
370 W
Performance
Switching capacity: 16 Gbps ¦ Forwarding performance (64-byte packet size): 13.1 Mpps
Capacity 
Active VLANs: 64
 Jumbo Frame Support 
9018 bytes
Remote Management Protocol 
SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, CLI
Features 

Full duplex capability, BOOTP support, ARP support, VLAN support, Syslog support, DiffServ support, IPv6 support, Spanning Tree Protocol (STP) support,

Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Port Aggregation Protocol (PAgP) support,

Trivial File Transfer Protocol (TFTP) support, Quality of Service (QoS), Dynamic ARP Inspection (DAI), Cisco EnergyWise technology, Shaped Round Robin (SRR),

LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), MAC Address Notification, Management Information Base (MIB), Class of Service (CoS),

DiffServ Code Point (DSCP) support  

Compliant Standards 
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP) 
Power 
AC 120/230 V ( 50/60 Hz ) 
Dimensions (WxDxH) 
45 cm x 33.2 cm x 4.4 cm 
Weight
5.4 kg

Optical Transceivers for Cisco WS-C2960+48PST-S Switch 

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 100BASE-FX. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number 
Description
Price
GLC-GE-100FX 
Cisco GLC-GE-100FX Compatible 100BASE-FX SFP 1310nm 2km Transceiver for Gigabit Ethernet SFP Ports
US$6.98
GLC-FE-100FX 
Cisco GLC-FE-100FX Compatible 100BASE-FX SFP 1310nm 2km DOM Transceiver
US$6.98
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website.
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco WS-C2960+48PST-S use Gigabit Ethernet SFP optical transceivers to establish fiber optic connections. These transceiver transceivers are field-replaceable, and provide uplink interfaces when inserted in an SFP module slot. These switches support a huge number of Gigabit Ethernet SFP optical transceivers. All these high quality fiber optic transceivers can be found on Cozlink for great prices. Cozlink also make sure to provide its customers same day shipping. You can also choose fiber optic pigtails and high speed cables from a great range of products on Cozlink.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.