Optical Transceivers for Cisco WS-C3650-48PD-S Switch

Cisco WS-C3650-48PD-S Switch Overview

WS-C3650-48PD-S belongs to the Cisco Catalyst 3650 Series Switches; Due to its enhanced features is best utilized in enterprise class businesses and can be used in multiple branch office networks or campus networks. Size of the business is usually medium size for this switch but it can be employed by small sized businesses as well. Cisco catalyst C3650-48PD-S is the next generation standalone with stack option switch. IP base feature set with 48 Gigabit Ethernet ports and2 * 1G SFP & 2 * 10G SFP+ uplink ports, WS-C3650-48PD-S is designed for access layer or distribution layer for enterprise. 3650 series set combines both wired and wireless capacity on a single platform with wireless controller functionality and supports up to 25 APs and 1000 clients for wireless connection (AP license purchase separately). Cisco Stackwise-160 simplifies network management and creates premium stacking architecture by supporting active-to-standby switchover without service interruption. Flexible Netflow monitors the network traffic flows for both wired and wireless users to help identify the threat of network.

Cisco WS-C3650-48PD-S

Cisco WS-C3650-48PD-S Switch Parameters

Device Type
 Switch - 48 ports - L3 - Managed - stackable         
Enclosure Type
Desktop, rack-mountable 1U 
Subtype
Gigabit Ethernet 
Ports 
48 x 10/100/1000 (PoE+) + 2 x 10 Gigabit SFP+ 
Power Over Ethernet (PoE) 
PoE+
PoE Budget
390 W 
Performance
Switching capacity: 176 Gbps ¦ Forwarding performance: 130.95 Mpps
Capacity
IPv4 routes: 24000 ¦ NetFlow entries: 48000 ¦ Virtual interfaces (VLANs): 4094 ¦ Switched virtual interfaces (SVIs): 1000 
MAC Address Table Size
32000 entries 
Jumbo Frame Support 
9198 bytes
Routing Protocol 
RIP-1, RIP-2, EIGRP, static IP routing, RIPng
Remote Management Protocol 
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH, CLI
Features 

ARP support, trunking, VLAN support, IGMP snooping, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support,

DHCP snooping, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, MLD snooping,

Dynamic ARP Inspection (DAI), EIGRP Stub Routing, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+),

Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Flexible NetFlow (FNF)    

Compliant Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at 
Power
AC 120/230 V ( 50/60 Hz ) 
Power Redundancy
Optional 
 Dimensions (WxDxH) 
44.5 cm x 44.8 cm x 4.4 cm 
Weight
7.6 kg

Optical Transceivers for Cisco WS-C3650-48PD-S Switch 

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 10GBASE-SR, 10GBASE-LRM, 10GBASE-LR, 10GBase-ER, 10GBASE-ZR/ZW. For more information on these Cisco optical transceivers, please check the following table.

MFG Part number
Description
Price
SFP-10G-SR
Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver
US$16.00 
SFP-10G-LRM 
Cisco SFP-10G-LRM Compatible 10GBASE-LRM SFP+ 1310nm 220m DOM Transceiver 
US$32.55
SFP-10G-LR 
Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver
US$32.55 
SFP-10G-ER 
Cisco SFP-10G-ER Compatible 10GBase-ER SFP+ 1550nm 40km Transceiver Module
US$153.45
SFP-10G-LR-S 
 Cisco SFP-10G-LR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 10km 
US$32.55 
SFP-10G-ER-S
 Cisco SFP-10G-ER-S Transceiver Module Compatible 10G 10G SFP+ 1550nm 40km
US$153.45
SFP-10G-ZR 
Cisco SFP-10G-ZR Compatible 10GBASE-ZR/ZW and OTU2e SFP+ 1550nm 80km DOM Transceiver
US$339.45
SFP-10G-ZR-S
 Cisco SFP-10G-ZR-S Transceiver Module Compatible 10G SFP+ Pluggable 1550nm 80km 
US$339.45
DWDM SFP+ 
Cisco DWDM-SFP10G-30.33 Transceiver Module Compatible 10G DWDM SFP+ ER Hot Pluggable DWDM:CH17~CH61 40km
US$260.40
CWDM SFP+ 
Cisco CWDM-SFP10G-1470 Transceiver Module Compatible 10G CWDM SFP+ ER hot Pluggable CWDM 1470-1610nm 40km
US$302.25
SFP-10G-BXD-I 
Cisco SFP-10G-BXD-I Transceiver Module Compatible 10G BIDI SFP+ 1330nm TX/1270nm RX 10km
US$60.45
SFP-H10GB-CU1-5M
Cisco SFP-H10GB-CU1-5M Compatible 10G SFP+ DAC Twinax Cable (1.5-meter, passive, SFP+ to SFP+, 30AWG)

SFP-H10GB-CU2M
Cisco SFP-H10GB-CU2M Compatible 10G SFP+ DAC Twinax Cable (2-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU2-5M 
Cisco SFP-H10GB-CU2-5M Compatible 10G SFP+ DAC Twinax Cable (2.5-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-ACU7M 
Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG) 

SFP-H10GB-ACU10M
Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG)

SFP-10G-AOC1M
Cisco SFP-10G-AOC1M Compatible 10G SFP+ AOC (1-meter, SFP+ to SFP+) 

SFP-10G-AOC2M
Cisco SFP-10G-AOC2M Compatible 10G SFP+ AOC (2-meter, SFP+ to SFP+) 

SFP-10G-AOC3M
Cisco SFP-10G-AOC3M Compatible 10G SFP+ AOC (3-meter, SFP+ to SFP+) 

SFP-10G-AOC5M
Cisco SFP-10G-AOC5M Compatible 10G SFP+ AOC (5-meter, SFP+ to SFP+) 

SFP-10G-AOC7M
Cisco SFP-10G-AOC7M Compatible 10G SFP+ AOC (7-meter, SFP+ to SFP+) 

SFP-10G-AOC10M
Cisco SFP-10G-AOC10M Compatible 10G SFP+ AOC (10-meter, SFP+ to SFP+)

SFP-10G-BXU-I 
 Cisco SFP-10G-BXU-I Transceiver Module Compatible 10G WDM BIDI SFP+ 1270nm TX/1330nm RX 10km 
US$60.45 
SFP-10G-BX40D-I
Cisco SFP-10G-BX40D-I Transceiver Module Compatible 10G WDM BIDI SFP+ 1330nm TX/1270nm RX 40km 
US$83.70 
 SFP-10G-BX40U-I 
Cisco SFP-10G-BX40U-I Transceiver Module Compatible 10G WDM BIDI SFP+ 1270nm TX/1330nm RX 40km 
US$83.70
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco WS-C3650-48PD-S can enable uniform wired-wireless policy enforcement, application visibility, flexibility, application optimization, and superior resiliency. They can help you increase wireless productivity and reduce your TCO. This high quality Cisco switch works with a number of Gigabit Ethernet SFP optical transceivers. You can easily find these high quality fiber optic transceivers at very competitive rates on Cozlink. What makes this even better that Cozlink also offer you a wide range of patch cords, fiber optic pigtails and high speed cables to choose from and Cozlink also ensure that you get the same day shipping.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.