All Cisco QSFP-100G-SR4-S's information (List price, Specs, Datasheet PDF, Compatibility m
2016-09-27

Cisco QSFP-100G-SR4-S Overview

This Cisco QSFP-100G-SR4-S Compatible QSFP28 transceiver provides 100GBase-SR throughput up to 100m over multi-mode fiber (MMF) at a wavelength of 850nm using a MPO connector. It is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. All of the transceivers are Trade Agreements Act (TAA) compliant.

Cisco QSFP-100G-SR4-S

Main Features
  • QSFP28 transceiver module ( equivalent to: Cisco QSFP-100G-SR4-S )
  • 100 Gigabit Ethernet
  • 100GBase-SR
  • MPO multi-mode
  • up to 328 ft
  • 850 nm

Cisco QSFP-100G-SR4-S List Price

Product  List Price (USD)  Description 
QSFP-100G-SR4-S $1,995.00 100GBASE SR4 QSFP Transceiver, MPO, 100m, Enterprise Class

Cisco QSFP-100G-SR4-S PDF

Cisco QSFP-100G-SR4-S Specs

Cisco Genuine  ONS-SC+-10G-LR 
Form Type  SFP+ 
Wavelength  1310nm
Interface LC duplex 
Cable Type  SMF 
TX Power  -8.2~0.5dBm 
Commercial Temperature Range 0 to 70°C (32 to 158°F) 
Max Data Rate 10.3125Gbps 
Max Cable Distance 10km
Optical Components  DFB 1310nm 
DOM Support  Yes 
Receiver Sensitivity  < -14.4dBm 
HTS-Harmonized Code  8517706000

Cisco QSFP-100G-SR4-S Compatibility matrix

Cisco QSFP-100G-SR4-S is supported on a wide range of Cisco equipment.  

Cisco Nexus 9300 Series

N9K-C9396PX

N9K-M12PQ

A9K-MPA-8X10GE

Cisco QSFP-100G-SR4-S Port Cabling Specifications

Cisco QSFP  Nominal Wavelength (nm)  Cable Type Core Size (Microns) Modal Bandwidth (MHz*km)*3 Cable Distance*1 Power Consumption (W)  Pull Tab Color
Cisco QSFP-100G-SR4-S  850  MMF

50.0

50.0 

2000 (OM3)

4700 (OM4) 

70m 

100m

 3.5  Beige

Optical Characteristics

 
Optical Characteristics

Direct Connection for Cisco 100G QSFP28 SR4 Transceivers

How to connect two Cisco Nexus 3232C switches with 100G QSFP28 SR4 transceivers directly? A Type B female MPO/MTP to female MPO/MTP is required. Figure 1 shows two Cisco 100G transceivers connected by a MTP female cable.
Direct Connection for Cisco 100G QSFP28 SR4 Transceivers
Item Number Description
1 QSFP28 Cisco QSFP-100G-SR4-S Compatible 100GBASE-SR4 850nm 100m Transceiver
2 1M MTP 10G OM3 50/125 Multimode Fiber Optic Trunk Cable, 12 Fiber, Polarity B, Female-Female, LSZH-Aqua, Bunch, 40GBASE-SR4 Interconnect Solution
3 QSFP28 Cisco QSFP-100G-SR4-S Compatible 100GBASE-SR4 850nm 100m Transceiver

All the collected information above belongs to original author, if infringement, please contact us immediately, we will solve this immediately.

Cisco QSFP-100G-SR4-S Compatible 100GBASE-SR4 QSFP28 Optical Transceiver Module (MMF, 850nm, 100m, MTP/MPO, DOM)

The Cisco QSFP-100G-SR4-S Compatible QSFP28 Optical Transceiver Module is designed for use in 100GBASE Ethernet throughput up to 100m over OM4 multimode fiber (MMF) using a wavelength of 850nm via a MTP/MPO-12 connector. This transceiver is compliant with IEEE 802.3bm 100GBASE-SR4 and CAUI-4 standard. Digital diagnostics functions are also available via the I2C interface, as specified by the QSFP28 MSA, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable to be used in various applications, such as data centers, high-performance computing networks, enterprise core and distribution layer applications.

 

The QSFP-100G-SR4-S= is a 100GBASE SR4 QSFP Transceiver designed by Cisco. This transceiver utilizes an MPO connector and can transmit up to 100m over OM4 MMF.

Product Highlights

Built-in Macom Chip, and Max. Power Consumption 2.5W

Tested in Targeted Switches for Superior Performance, Quality, and Reliability

High-Speed Electrical Interface Compliant to IEEE 802.3bm

Support 100G to 4x25G Breakout Application

Hot Pluggable QSFP28 MSA Compliant

Class 1 FDA Laser Safety and RoHS Compliant

Digital Optical Monitoring Capability for Strong Diagnostic Capabilities

 

Description

Cisco 100GBASE-QSFP Transceiver Module, QSFP-100G-SR4-S, New Original

When it comes to the fastest in modern networking, the Cisco 100 GBASE QSFP transceiver module is ahead of the game. It’s a short-range transceiver module that supports link lengths up to 1,000 meters. At such lengths, it can readily maintain transmission speeds of 100 Gbps.

It achieves such communication through multi-mode fiber that can connect via MTP or MPO. The transceiver operates on an 850 nm wavelength.

This is a high-density transceiver that is designed to use lower power. It’s the latest generation of the Cisco 100G transceiver modules, and it’s a mainstay in modern data centers and advanced networks.

Empowered Networking Solutions

The 100GBase QSFP module is designed to improve on networks at a fundamental level. Being hot-swappable, it simplifies network infrastructure and management.

Being efficient and affordable, it provides a scalable solution that can grow with (and even ahead of) your network.

Ultimately, this is a single component that can transform a network and bring it up to speed with modern specifications.

 

 

FAQ:

 

Q:How can I control the internal registers of the module?

A:Hello, you can read register information through the I2C bus.

 

Q:What is the difference in specification between QSFP28-100G-SR4 and QSFP28-100G-SR4-S?

A:The "-S" suffix in QSFP28-100G-SR4-S indicates that the transceiver does not support FCOE (Fibre Channel over Ethernet) functionality, meaning it cannot transport the Fibre Channel protocol over Ethernet.

 

Q:What is the difference of the suitable application scenarios between QSFP28-BIDI-100G and QSFP28-SR4-100G?

A:Hello, both the QSFP28-BIDI-100G and QSFP28-SR4-100G are suitable for short-distance data center transmission. The QSFP28-SR4-100G uses MTP 12-core/8-core Type B polarity cables (#69009) and supports distances of up to 100m. The QSFP28-BIDI-100G uses LC duplex cables (#40220) and supports distances of up to 150m. It offers cost savings in fiber infrastructure expenditures compared to 100G SR4.

 

Q:What is the Failure in Time, median lifespan of the QSFP28-SR4-100G ?

A:Hello, the FIT is 301, the annual failure rate is 0.263676%, and the median lifespan is 189 years. It should be noted that the median lifespan is only a statistical value, which provides a reference time for the normal operation of the transceiver.

 

Q:Can the 100G SR4 transceiver be downgraded to 1G after disabling CDR functionality?

A:Hello, CDR is enabled by default. It can be downgraded to a 1G rate after disabling it.

 

Q:I want to know MTBF value at 40°C/90% CL conditions for the QSFP28-SR4-100G.

A:Hello, the MTBF value is 3322259 hours.

 

TECHNICAL SUPPORT
Get solutions or consultation from the technical team.