Optical Transceivers for Cisco N3K-C3548P-10G Switch

Cisco N3K-C3548P-10G Switch Overview

N3K-C3548P-10G belongs to the Cisco Catalyst Nexus 3500 Series Switches; these switches are ideal for traditional or fully automated data center deployments. The Cisco Nexus 3548 switch is a compact one-rack-unit form-factor 10 Gigabit Ethernet switch providing line-rate layer 2 and 3 switching at ultra-low latency. The switch runs the industry-leading Cisco NX-OS software operating system, providing customers with comprehensive features and functions that are widely deployed globally.

Cisco N3K-C3548P-10G Switch

Cisco N3K-C3548P-10G Switch Parameters

Device Type 
Switch - 48 ports - Managed       
Enclosure Type 
Rack-mountable 1U 
Subtype 
10 Gigabit Ethernet
Ports 
48 x 1 Gigabit / 10 Gigabit SFP+
Performance 
Switching capacity: 960 Gbps ¦ Forwarding performance: 720 Mpps
Capacity
Virtual interfaces (VLANs): 4096 ¦ ACL entries: 4096 ¦ IPv4 routes: 24000 ¦ Host table entries (IPv4): 64000 ¦ Rapid Spanning Tree Protocol instances: 512 ¦ Multiple Spanning Tree Protocol instances: 64
Jumbo Frame Support 
9216 bytes
MAC Address Table Size
64K entries
Remote Management Protocol 
SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI
Features 

NAT support, VLAN support, Syslog support, Broadcast Storm Control, Multicast Storm Control,

Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple

Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support,

Jumbo Frames support, STP Root Guard, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN

Spanning Tree Plus (PVRST+), IPv4 support, DHCP relay, Link Aggregation Control Protocol (LACP)

Compliant Standards
IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP)
Power
AC 120/230 V ( 50/60 Hz )
Power Redundancy
Yes
Dimensions (WxDxH)
43.9 cm x 46.7 cm x 4.36 cm
Weight
7.9 kg

Optical Transceivers for Cisco N3K-C3548P-10G Switch

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 10GBASE-SR SFP+, 10GBASE-LR SFP+, 10GBase-ER SFP+, 10G SFP+ DAC Twinax Cable, 10G SFP+ DAC Twinax Cable, 10G SFP+ AOC, 10GBASE-ZR/ZW. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number
Description
Price
SFP-10G-SR 
Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver
US$16.00
SFP-10G-LR
Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver 
US$32.55 
SFP-10G-ER
Cisco SFP-10G-ER Compatible 10GBase-ER SFP+ 1550nm 40km Transceiver Module
US$153.45
SFP-H10GB-CU1M
Cisco SFP-H10GB-CU1M Compatible 10G SFP+ DAC Twinax Cable (1-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU3M
Cisco SFP-H10GB-CU3M Compatible 10G SFP+ DAC Twinax Cable (3-meter, passive, SFP+ to SFP+, 30AWG)

SFP-H10GB-CU5M
Cisco SFP-H10GB-CU5M Compatible 10G SFP+ DAC Twinax Cable (5-meter, passive, SFP+ to SFP+, 24AWG) 

SFP-H10GB-ACU7M
Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG)

SFP-H10GB-ACU10M
Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG)

SFP-10G-SR-S 
Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 850nm 300m
US$16.00 
SFP-10G-LR-S
Cisco SFP-10G-LR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 10km
US$32.55
SFP-10G-ER-S 
Cisco SFP-10G-ER-S Transceiver Module Compatible 10G 10G SFP+ 1550nm 40km
US$153.45
SFP-10G-ZR-S
Cisco SFP-10G-ZR-S Transceiver Module Compatible 10G SFP+ Pluggable 1550nm 80km 
US$339.45
SFP-H10GB-CU1-5M
Cisco SFP-H10GB-CU1-5M Compatible 10G SFP+ DAC Twinax Cable (1.5-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU2M
Cisco SFP-H10GB-CU2M Compatible 10G SFP+ DAC Twinax Cable (2-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU2-5M
Cisco SFP-H10GB-CU2-5M Compatible 10G SFP+ DAC Twinax Cable (2.5-meter, passive, SFP+ to SFP+, 30AWG)

SFP-10G-AOC1M
Cisco SFP-10G-AOC1M Compatible 10G SFP+ AOC (1-meter, SFP+ to SFP+) 

SFP-10G-AOC2M
Cisco SFP-10G-AOC2M Compatible 10G SFP+ AOC (2-meter, SFP+ to SFP+) 

SFP-10G-AOC3M
Cisco SFP-10G-AOC3M Compatible 10G SFP+ AOC (3-meter, SFP+ to SFP+) 

SFP-10G-AOC5M
Cisco SFP-10G-AOC5M Compatible 10G SFP+ AOC (5-meter, SFP+ to SFP+)

SFP-10G-AOC7M 
Cisco SFP-10G-AOC7M Compatible 10G SFP+ AOC (7-meter, SFP+ to SFP+)

SFP-10G-ZR
Cisco SFP-10G-ZR Compatible 10GBASE-ZR/ZW and OTU2e SFP+ 1550nm 80km DOM Transceiver 
US$339.45
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco N3K-C3548P-10G switch contains no physical layer chips, allowing low latency and low power consumption. These switches support a huge number of Gigabit Ethernet SFP optical transceivers. All these high quality fiber optic transceivers can be found on Cozlink for great prices. Cozlink also make sure to provide its customers same day shipping. You can also choose fiber optic pigtails and high speed cables from a great range of products on Cozlink.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.