- Related articles
- All Cisco SFP-OC3-SR's information (List price, Specs, Datasheet PDF, Compatibility matrix
- Optical Transceivers for Cisco SLM2048PT-UK Switch
- How to Optimize Data Center with Ribbon Fiber Optic Cable?
- All Cisco DWDM-X2-40.56's information (List price, Specs, Datasheet PDF, Compatibility mat
- New: About Cisco 4000 Series ISR Gigabit Ethernet WAN Modules
- Optical Transceivers for Cisco WS-C3650-48FQ-S Switch
- Optical Transceivers for Cisco WS-C2960S-F48FPS-L Switch
- All Cisco CWDM-SFP-1470's information (List price, Specs, Datasheet PDF, Compatibility mat
- All Cisco DS-SFP-FC4G-SW's information (List price, Specs, Datasheet PDF, Compatibility ma
- What is PCI Express card?
Cisco XFP-10GER-OC192IR Overview
10GBASE-ER and OC192 IR2 XFP Module. This Cisco XFP-10GER-OC192IR compatible XFP transceiver provides 10GBase-ER throughput up to 40km over single-mode fiber (SMF) at a wavelength of 1550nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. All of our transceivers are Trade Agreements Act (TAA) compliant.
Main Features
- XFP transceiver module
- 10 Gigabit Ethernet
- 10GBase-ER
- 10GBase-EW
- LC single mode
- up to 24.9 miles
- OC-192/STM-64
- 1530-1565 (TX) / 1550 (RX) nm
Cisco XFP-10GER-OC192IR List Price
Product | List Price (USD) | Description |
XFP-10GER-OC192IR | $10,000.00 | ^10GBASE-ER and OC192 IR2 XFP Module |
Cisco XFP-10GER-OC192IR PDF
Cisco XFP-10GER-OC192IR Specs
Environmental Parameters | |
Humidity Range Operating: | 0 - 95% (non-condensing) |
Max Operating Temperature: | 158 °F |
Min Operating Temperature: | 23 °F |
Interface Provided | |
Connector Qty: | X 2 |
Connector Type: | LC single mode |
Qty: | 1 |
Type: | Ethernet 10GBase-ER/10GBase-EW |
Line Properties | |
Line Rate: | OC-192/STM-64 |
Miscellaneous | |
Compliant Standards: | cUL , EN 60825-1 , EN 60825-2 , EN 60950 , FCC Part 15 B , IEC 60825-1 , IEC 60825-2 , MIL-STD-883 , MSA , RoHS 6/6 , UL |
MTBF: | 715,000 hours |
Networking | |
Cabling Type: | Ethernet 10GBase-ER , Ethernet 10GBase-EW |
Compliant Standards: | IEEE 802.3ae |
Connectivity Technology: | Wired |
Data Link Protocol: | 10 Gigabit Ethernet |
Data Transfer Rate: | 11.1 Gbps |
Form Factor: | Plug-in module |
Max Transfer Distance: | 24.9 miles |
Optical Wave Length: | 1530-1565 (TX) / 1550 (RX) nm |
Type: | XFP transceiver module |
Power Device | |
Type: | None |
Slot Provided | |
Type: | None |
Slot Required | |
Total Qty: | 1 |
Type: | XFP |
Dimensions & Weight | |
Depth: | 3.1 in |
Height: | 0.5 in |
Width: | 0.7 in |
Connectors (for SD) | |
Left Connector Type: | LC single mode |
Cisco XFP-10GER-OC192IR Compatibility matrix
Cisco XFP-10GER-OC192IR is supported on a wide range of Cisco equipment. | |
Cisco SPA-OC192POS-XFP Cisco 7600-ES20-10G3C Cisco SPA-1XTENGE-XFP Cisco ME-3600X-24CX-M |
Cisco SPA-1X10GE-WL-V2 Cisco 7600-ES20-10G3CXL Cisco SPA-1X10GE-L-V2 |
End-of-Life Product Part Numbers for the Cisco Multirate 10GBASE-ER and OC-192/STM-64 IR-2 XFP Module for SMF (XFP-10GER-OC192IR)
End-of-Sale Product Part Number | Product Description | Replacement Product Part Number | Replacement Product Description |
XFP-10GER-OC192IR | 10GBASE-ER and OC192 IR2 XFP Module | XFP-10GER-192IR+ | Cisco Multirate 10GBASE-ER and OC-192/STM-64 IR-2 XFP Module |
XFP-10GER-OC192IR= | 10GBASE-ER and OC192 IR2 XFP Module | XFP-10GER-192IR+= | Cisco Multirate 10GBASE-ER and OC-192/STM-64 IR-2 XFP Module |
All the collected information above belongs to original author, if infringement, please contact us immediately, we will solve this immediately.
XFP-10GER-OC192IR Overview
The 10-Gigabit XFP transceiver module XFP-10GER-OC192IR is a hot-swappable I/O device that plugs into 10-Gigabit ports.
Cisco XFP-10GER-OC192IR Compatible 10GBASE-ER/EW and OC-192/STM-64 IR-2 XFP Transceiver Module (SMF, 1550nm, 40km, LC, DDM)
The Cisco XFP-10GER-OC192IR compatible optical transceiver is equipped with an LC duplex connector, reaching a link up to 40km over OS2. QSFPTEK manufactured 10G XFP transceiver module is compliant with XFP MSA, CPRI, eCPRI. Besides, DDM (digital diagnostics monitoring) function is supported on the 10G fiber optic transceiver to achieve real-time operating parameters monitoring. This 10G XFP transceiver caters to metro or long-haul networks, etc.
Product Highlights
-
Rate: 10G; Connector: Duplex LC;
-
EML+PIN; Low Power Consumption <3.5W;
-
Applied in Data Center and Metro Networks;
-
Fully Compatible with 100+ Vendors;
-
XFP MSA Compliant;
-
Max. Power Consumption 3W ;
-
Tested in Targeted Switch for Superior Performance, Quality and Reliability ;
-
Hot Pluggable XFP MSA Compliant;
-
Digital Optical Monitoring Capability for Strong Diagnostic Capabilities;
-
Optical Interoperability with 10GBASE XENPAK, X2, and XFP Interfaces on the Same Link;
-
Class 1 Laser Safety and RoHS Compliant ;
-
IEEE 802.3ae Compliant.
FAQ:
Q:How hot this one runs?
A:Its commercial Temperature Range is 0 to 70°C (32 to 159°F).
Q:I want to know the maximum cable distance of this module.Who can tell me about it?
A:Its maximum cable distance is 40KM.