How to reset TENDA router

Resetting your Tenda router can solve a host of connectivity issues, from slow browsing speeds to connection drop-outs. This article will take you through the detailed steps involved in resetting your Tenda router.
Understanding Router Reset
Before we proceed, it's crucial to understand what a router reset does. Resetting a router means restoring it to its factory settings, which erases any changes you've made since you first got it. This includes your network name (SSID), password, and any custom configurations related to port forwarding or IP reservations.
Please note, resetting your router is a last resort solution when dealing with persistent network issues. Before doing a factory reset, try rebooting your router or checking if firmware updates are available, as these can sometimes solve your problem without erasing your settings.
How to Reset Tenda Router

I. Solution 1:

Step 1: Open the browser and input plc.tendawifi.com in address bar to login setup page. By default, password is “admin”.

 
Step 2: Choose “System”
 
Step 3: Tap “Reset” button.
I. Solution 2:  
Step 1: Find the Reset button on the side of the PLC.
 
Step 2: Press the reset button for 8 seconds until all lights on and then off few seconds later.
 
 

III. Solution 3:Using the Reset Button

All Tenda routers come with a physical Reset button, typically located at the back of the router.
1.Locate the Reset Button: Look at the back of your Tenda router. You will find a small, recessed button labeled 'Reset.'
2.Press the Reset Button: Use a pointed object like a paperclip or toothpick to press the reset button.
3.Hold the Reset Button: Hold down the reset button for about 10 seconds.
4.Wait for the Router to Reset: Release the reset button. The router will now reboot itself. You will notice the lights on the router blink and then stabilize. This process may take a couple of minutes.
5.Reconfigure Your Router: Once the router has reset, you will need to reconfigure your network settings. You can connect to your router using the default credentials mentioned in the user manual or the sticker on the router.

IV. Solution 4:Using the Web-Based Interface

If you can access your Tenda router's web interface, you can also reset your router to its factory settings through there.
1.Access the Router's Interface: Open a web browser and enter the router's IP address, typically '192.168.0.1' or '192.168.1.1'. Then, log in using your current router credentials.
2.Navigate to the Reset Option: Go to 'Advanced Settings' or 'System Tools' (depending on your router model). You'll find the 'Reset' option.
3.Reset the Router: Click on 'Reset,' and then confirm your choice in the pop-up window.
4.Wait for the Router to Reset: The router will now reboot and reset itself, which may take a few minutes.
5.Reconfigure Your Router: After resetting, you'll need to set up your network again, starting with the default credentials.
Post-Reset Steps
After resetting your Tenda router, you need to reconfigure it from scratch. Here are the general steps:
1.Connect to the Network: Connect a device to the router using an Ethernet cable or Wi-Fi. The default SSID and password are usually printed on the router's label.
2.Access the Router's Interface: Open a web browser and enter the router's IP address, then log in with the default credentials.
3.Change the Default Credentials: For security purposes, it's advisable to change the default username and password. You can usually do this under the 'System Settings' or 'Security' section.
4.Configure Wi-Fi Settings: Go to 'Wireless Settings' and set up your new SSID and password. It's also advisable to use WPA2 or higher security settings.
5.Set Up Other Features: Depending on your needs, you might want to set up additional features like parental controls, guest networks, port forwarding, etc.
Remember, resetting your Tenda router should only be used as a last resort when troubleshooting network issues. It's always worth trying less drastic measures first, like rebooting the router or updating the firmware."
 
 
 

V. Solution 5:

 
"Resetting a Tenda router refers to the process of restoring the router to its factory settings. During this process, all settings and configurations, including the router's username and password, wireless network name and password, port forwarding, DNS servers, and so on, will be cleared.
How to reset Tenda router and the method of resetting Tenda router to factory settings. The specific steps to reset a Tenda router may vary slightly depending on the model. Here are some common methods for resetting a Tenda router to factory settings:
V. Solution 5: Using the Reset Button on the Router
1.Find the Reset button on the back or bottom of the router.
2.Use a needle or other thin object to hold down the Reset button for a few seconds until the indicator light on the router starts to flash.
3.Release the Reset button, and the router will begin to reboot and restore the factory settings.

Ⅵ.Solution 6: Restore Factory Settings Through the Router Management Page

1.Connect your computer to the network of the Tenda router.
2.Open the browser, enter the address of the router management page, usually 192.168.1.1 or 192.168.0.1, then press Enter.
3.Enter the admin username and password to log into the router management page.
4.Find the "System Settings" or "System Maintenance" options in the management page, then select "Restore Factory Settings" or "Restore Default Settings."
5.Click the "Confirm" or "Apply" button, wait for the router to reboot and restore the factory settings.
Before resetting to factory settings, you should back up all router settings and configurations to avoid losing important information. Additionally, restoring the router to factory settings will clear all settings and configurations, including the router's username and password, wireless network name and password, port forwarding, DNS servers, and so on. Therefore, before performing the operation, make sure that all important data and settings have been backed up."