Optical Transceivers for Cisco N5548UPM-6N2248TP Switch

Cisco N5548UPM-6N2248TP Switch Overview

N5548UPM-6N2248TP belongs to the Cisco Catalyst Nexus 5000 Series Switches; these switches are ideal for traditional or fully automated data center deployments. Cisco Nexus 5000 series switches are an excellent match. With low latency, front-to-back cooling, and rear-facing data ports, the Cisco Nexus 5000 series is designed for a broad range of physical, virtual, storage access, and high-performance computing environments, thus giving customers the flexibility to meet and scale their data center requirements in a gradual manner and at a pace that aligns with their business objectives. The switch series, using cut-through architecture, supports line-rate 10 Gigabit Ethernet on all ports while maintaining consistently low latency independent of packet size and services enabled. It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks. These features allow the switches to support multiple traffic classes over a lossless Ethernet fabric, thus enabling consolidation of LAN, SAN, and cluster environments. Its ability to connect Fiber Channel over Ethernet (FCoE) to native Fiber Channel protects existing storage system investments while dramatically simplifying in-rack cabling.

Cisco N5548UPM-6N2248TP Switch

Cisco N5548UPM-6N2248TP Switch Parameters

Device Type 
Switch - 48 ports - Managed - with 6x Cisco Nexus 2248TP GE Fabric Extender         
Enclosure Type
Rack-mountable 1U
Subtype
10 Gigabit Ethernet
Ports
48 x SFP+
MAC Address Table Size
32K entries
Remote Management Protocol
SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SMI-S, SSH-2, CLI
Features

Layer 2 switching, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast

Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol

(MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS),

Jumbo Frames support, Rapid Per-VLAN Spanning Tree Plus (PVRST+)

Compliant Standards
IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 801.1p
Power 
AC 120/230 V ( 50/60 Hz )
Power Redundancy 
Yes
Dimensions (WxDxH)
43.9 cm x 74.9 cm x 4.4cm

Optical Transceivers for Cisco N5548UPM-6N2248TP Switch

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 10GBASE-SR, 10GBASE-LR, 10G SFP+ DAC Twinax Cable. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number
Description 
Price
SFP-10G-SR
Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver 
US$16.00
SFP-10G-LR
Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver 
US$32.55
SFP-10G-SR-S
Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 850nm 300m 
US$16.00
SFP-10G-LR-S
Cisco SFP-10G-LR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 10km 
US$32.55
SFP-H10GB-CU1M
Cisco SFP-H10GB-CU1M Compatible 10G SFP+ DAC Twinax Cable (1-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU3M
Cisco SFP-H10GB-CU3M Compatible 10G SFP+ DAC Twinax Cable (3-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU5M
Cisco SFP-H10GB-CU5M Compatible 10G SFP+ DAC Twinax Cable (5-meter, passive, SFP+ to SFP+, 24AWG)

SFP-H10GB-ACU7M 
Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG)

SFP-H10GB-ACU10M
Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG)

Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco N5548UPM-6N2248TP switch is designed for data center environments with cut-through technology that enables consistent low-latency Ethernet solutions, with front-to-back cooling, and with data ports in the rear, bringing switching into close proximity with servers and making cable runs short and simple. These switches support a huge number of Gigabit Ethernet SFP optical transceivers. All these high quality fiber optic transceivers can be found on Cozlink for great prices. Cozlink also make sure to provide its customers same day shipping. You can also choose fiber optic pigtails and high speed cables from a great range of products on Cozlink.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.