HOME > Article > Switch Topics > Switch Encyclopedia
Recommend tag
Optical Modules 100G Optical Module QSFP28 Difference Data Center BIDI Switch 1000BASE-SR 1000BASE-T SFP SFP-OC12-LR1 FTTH Fiber Media Converter PON Fiber Optic Technology 10GBASE-SR Transceiver 1000BASE Tranceiver 1000BASE-T Transceiver 10 Gigabit Ethernet
You can learn about us through other platforms
Optical Transceivers for Cisco N5010P-4N2248TF-B Switch
2016-11-21
Cisco Nexus 5000 Switch N5010P-4N2248TF-B SFP Switch Type Of Tutorial

Cisco N5010P-4N2248TF-B Switch Overview

N5010P-4N2248TF-B belongs to the Cisco Catalyst Nexus 5000 Series Switches; these switches are ideal for traditional or fully automated data center deployments. The Cisco Nexus 5010 is a 1RU, 10 Gigabit Ethernet, FCoE, and Fiber Channel switch providing more than 520-Gbps throughput with very low latency. It has 20 fixed 10 Gigabit Ethernet and FCoE SFP+ ports. The first 8 fixed ports are dual speed, supporting both 10 Gigabit Ethernet and Gigabit Ethernet in hardware and providing a smooth migration path to 10 Gigabit Ethernet. One expansion module slot can be configured to support up to 6 additional 10 Gigabit Ethernet and FCoE SFP+ ports, up to 8 4Gbps SFP Fiber Channel switch ports, up to 6 8Gbps SFP+ Fiber Channel switch ports or a combination of 4 additional 10 Gigabit Ethernet and FCoE SFP+ ports with 4 additional 4/2/1-Gbps Fiber Channel switch ports. The switch has a serial console port and an out-of-band 10/100/1000-Mbps Ethernet management port.

Cisco N5010P-4N2248TF-B Switch

Cisco N5010P-4N2248TF-B Switch Parameters

Device Type 
Switch - 20 ports - Managed - with 4x Cisco Nexus 2248TP GE Fabric Extender, 32 x Fabric Extender Transceivers for N5K-to-N2K interconnect              
Enclosure Type
Desktop 1U
Subtype
10 Gigabit Ethernet
Ports
20 x SFP+
MAC Address Table Size
16K entries
Remote Management Protocol
SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SMI-S, SSH-2, CLI
Features

Layer 2 switching, trunking, VLAN support, Syslog support, packet filtering, Weighted Round

Robin (WRR) queuing, MAC address filtering, Broadcast Storm Control, IPv6 support, ASIC VPN,

Multicast Storm Control, Unicast Storm Control, Per-VLAN Spanning Tree (PVST), Multiple Spanning

Tree Protocol (MSTP) support, priority-based flow control, Access Control List (ACL) support,

Quality of Service (QoS), Jumbo Frames support

Compliant Standards
IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP)
Power 
AC 120/230 V ( 50/60 Hz )
Power Redundancy 
Yes
Dimensions (WxDxH)
44.5 cm x 57.1 cm x 8.9 cm

Optical Transceivers for Cisco N5010P-4N2248TF-B Switch 

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 10GBASE-SR, 10GBASE-LR, 10G SFP+ DAC Twinax Cable. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number
Description 
Price
SFP-10G-SR
Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver 
US$16.00
SFP-10G-LR
Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver 
US$32.55
SFP-10G-SR-S
Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 850nm 300m 
US$16.00
SFP-10G-LR-S
Cisco SFP-10G-LR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 10km 
US$32.55
SFP-H10GB-CU1M
Cisco SFP-H10GB-CU1M Compatible 10G SFP+ DAC Twinax Cable (1-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU3M
Cisco SFP-H10GB-CU3M Compatible 10G SFP+ DAC Twinax Cable (3-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU5M
Cisco SFP-H10GB-CU5M Compatible 10G SFP+ DAC Twinax Cable (5-meter, passive, SFP+ to SFP+, 24AWG)

SFP-H10GB-ACU7M 
Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG)

SFP-H10GB-ACU10M
Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG)

Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco N5010P-4N2248TF-B switch is powered by 1+1 redundant, hot-pluggable power supplies and 1+1 redundant, hot-pluggable fan modules to provide highly reliable front-to-back cooling. These switches are compatible with various Gigabit Ethernet SFP optical transceivers. All these fiber optic transceivers are available on Cozlink at really competitive prices. You can expect same day shipping on Cozlink. Not just optical transceivers, you can also find fiber optic pigtails and high speed cables for your choice on Cozlink.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.