- Related articles
- Optical Transceivers for Cisco WS-C3650-48TD-L Switch
- All Cisco DS-CWDM-1470's information (List price, Specs, Datasheet PDF, Compatibility matr
- Optical Transceivers for Cisco WS-C3560E-12SD-E Switch
- What Is GJFJV Fiber Optic Cable?
- Optical Transceivers for Cisco SRW2016-K9-UK Switch
- What are SFP ports?
- All Cisco GLC-FE-100FX-RGD's information (List price, Specs, Datasheet PDF, Compatibility
- Optical Transceivers for Cisco C3850-NM-8-10G= Switch
- What is PCI Wireless Ethernet Adapter?
- Optical Transceivers for Cisco N3K-C3132Q-40GE= Switch
Recommend tag
You can learn about us through other platforms
Optical Transceivers for Cisco N9K-C9396TX= Switch
Cisco N9K-C9396TX= Switch Overview
N9K-C9396TX= belongs to the Cisco Catalyst Nexus 9000 Series Switches; these switches are ideal for traditional or fully automated data center deployments. Cisco Nexus 9500 Linecard - For Data Networking, Optical Network - 4 x QSFP+ , 48 x SFP+ 52 x Expansion Slots SFP+ PLUS 4P QSFP.
Cisco N9K-C9396TX= Switch Parameters
| Device Type | Switch - 48 ports - L3 - Managed |
| Enclosure Type | Desktop, rack-mountable 2U |
| Subtype | 40 Gigabit Ethernet |
| Ports | 48 x 10GBase-T + 12 x 40 Gigabit QSFP+ |
| Performance | Bandwidth: 1.92 Tbps |
| Capacity | Longest prefix match (LPM) entries (IPv4): 16000 ¦ Host table entries (IPv4): 88000 ¦ MAC addresses: 160000 ¦ IPv4 routes (Multicast): 32000 ¦ Virtual interfaces (VLANs): 4096 |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2 |
| Features | Flow control, modular design, load balancing, VLAN support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, RDMA support, LLDP support, Link Aggregation Control Protoco l (LACP), DiffServ Code Point (DSCP) support |
| Compliant Standards | IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 801.1p, IEEE 802.3ba |
| Power Redundancy | Yes |
| Dimensions (WxDxH) | 44.5 cm x 57.1 cm x 8.9 cm |
Optical Transceivers for Cisco N9K-C9396TX= Switch
Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 40G QSFP+, AOC, 40G QSFP+ SR, 40G QSFP+ CSR4, 40G QSFP+ LR. For more information on these Cisco optical transceivers, please check the following table.
| MFG Part number | Description | Price |
| SFP-10G-SR | Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver | US$16.00 |
| SFP-10G-LR | Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver | US$32.55 |
| SFP-10G-ER | Cisco SFP-10G-ER Compatible 10GBase-ER SFP+ 1550nm 40km Transceiver Module | US$153.45 |
| SFP-10G-ZR | Cisco SFP-10G-ZR Compatible 10GBASE-ZR/ZW and OTU2e SFP+ 1550nm 80km DOM Transceiver | US$339.45 |
| SFP-10G-SR-S | Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 850nm 300m | US$16.00 |
| SFP-10G-LR-S | Cisco SFP-10G-LR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 10km | US$32.55 |
| SFP-10G-ER-S | Cisco SFP-10G-ER-S Transceiver Module Compatible 10G 10G SFP+ 1550nm 40km | US$153.45 |
| SFP-10G-ZR-S | Cisco SFP-10G-ZR-S Transceiver Module Compatible 10G SFP+ Pluggable 1550nm 80km | US$339.45 |
| SFP-H10GB-CU1M | Cisco SFP-H10GB-CU1M Compatible 10G SFP+ DAC Twinax Cable (1-meter, passive, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-CU1-5M | Cisco SFP-H10GB-CU1-5M Compatible 10G SFP+ DAC Twinax Cable (1.5-meter, passive, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-CU2M | Cisco SFP-H10GB-CU2M Compatible 10G SFP+ DAC Twinax Cable (2-meter, passive, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-CU2-5M | Cisco SFP-H10GB-CU2-5M Compatible 10G SFP+ DAC Twinax Cable (2.5-meter, passive, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-CU3M | Cisco SFP-H10GB-CU3M Compatible 10G SFP+ DAC Twinax Cable (3-meter, passive, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-CU5M | Cisco SFP-H10GB-CU5M Compatible 10G SFP+ DAC Twinax Cable (5-meter, passive, SFP+ to SFP+, 24AWG) | |
| SFP-H10GB-ACU7M | Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG) | |
| SFP-H10GB-ACU10M | Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG) | |
| SFP-10G-AOC1M | Cisco SFP-10G-AOC1M Compatible 10G SFP+ AOC (1-meter, SFP+ to SFP+) | |
| SFP-10G-AOC2M | Cisco SFP-10G-AOC2M Compatible 10G SFP+ AOC (2-meter, SFP+ to SFP+) | |
| SFP-10G-AOC3M | Cisco SFP-10G-AOC3M Compatible 10G SFP+ AOC (3-meter, SFP+ to SFP+) | |
| SFP-10G-AOC5M | Cisco SFP-10G-AOC5M Compatible 10G SFP+ AOC (5-meter, SFP+ to SFP+) | |
| SFP-10G-AOC7M | Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG) | |
| SFP-10G-AOC10M | Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG) | |
| SFP-10G-LRM | Cisco SFP-10G-LRM Compatible 10GBASE-LRM SFP+ 1310nm 220m DOM Transceiver | US$32.55 |
| DWDM SFP+ | 10G SFP+ DWDM 40km Transceiver CH17~CH61 LC SM Duplex DDM Optical Module | US$260.24 |
| QSFP-4SFP10G-CU1M | 1m Cisco QSFP-4SFP10G-CU1M Compatible 40G QSFP+ to 4x10G SFP+ Passive Direct Attach Copper Breakout Cable | |
| QSFP-4SFP10G-CU3M | 3m Cisco QSFP-4SFP10G-CU3M Compatible 40G QSFP+ to 4x10G SFP+ Passive Direct Attach Copper Breakout Cable | |
| QSFP-4SFP10G-CU5M | 5m Cisco QSFP-4SFP10G-CU5M Compatible 40G QSFP+ to 4x10G SFP+ Passive Direct Attach Copper Breakout Cable | |
| QSFP-4X10G-AC7M | Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 7-meter, active | |
| QSFP-4X10G-AC10M | Cisco 40GBASE-CR4 QSFP to 4 10GBASE-CU SFP+ direct-attach breakout cable, 10-meter, active | |
| SFP-10G-BXD-I | Cisco SFP-10G-BXD-I Transceiver Module Compatible 10G BIDI SFP+ 1330nm TX/1270nm RX 10km | US$60.45 |
| SFP-10G-BXU-I | Cisco SFP-10G-BXU-I Transceiver Module Compatible 10G WDM BIDI SFP+ 1270nm TX/1330nm RX 10km | US$60.45 |
| CWDM SFP+ | 10G SFP+ CWDM 20km Transceiver 1270~1330nm LC SM Duplex DDM Optical Module | US$139.50 |
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.
How to determine what types of optical transceivers for Cisco switches?
1. Finding the corresponding optical module compatibility matrix via Cisco official website.
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.
Summary
The Cisco N9K-C9396TX= switches support the 4x 10GE break-out mode to operate as 4 individual 10GE ports. This allows the line card to provide up to 144 10GE SFP+ ports. This high quality Cisco switch works with a number of Gigabit Ethernet SFP optical transceivers. You can easily find these high quality fiber optic transceivers at very competitive rates on Cozlink. What makes this even better that Cozlink also offer you a wide range of patch cords, fiber optic pigtails and high speed cables to choose from and Cozlink also ensure that you get the same day shipping.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.