Optical Transceivers for Cisco WS-C3560CX-8TC-S Switch

Cisco WS-C3560CX-8TC-S Switch Overview

WS-C3560CX-8TC-S belongs to the Cisco Catalyst 3560-CX Series Switches; With their quiet, fan-less design and compact footprint, these switches offer flexible mounting options and open up a variety of network design and connectivity options. Use them in offices, classrooms, hotels, retail stores, and other enterprise and branch locations. The setup allows for shorter cable runs from the compact switches, allowing for flexibility in space redesign and growth as new devices join the network - this eliminating the need for expensive and inflexible cabling infrastructure. Cisco Catalyst 3560-CX series WS-3560CX-8TC-S Gigabit Ethernet managed switches is comprised with 8 x Gigabit Ethernet ports, 2 x Gigabit Ethernet RJ-45 uplinks and 2 x SFP upliks.

Cisco WS-C3560CX-8TC-S Switch

Cisco WS-C3560CX-8TC-S Switch Parameters

Device Type 
Switch - 8 ports - Managed         
Enclosure Type 
Desktop, rack-mountable, DIN rail mountable, wall-mountable 1U
Subtype
Gigabit Ethernet
Ports
8 x 10/100/1000 + 2 x combo Gigabit SFP
Performance
Forwarding performance: 16 Gbps ¦ Forwarding performance (64-byte packet size): 17.9 Mpps
Capacity 
Virtual interfaces (VLANs): 1023
Jumbo Frame Support 
9018 bytes
Routing Protocol 
RIP-1, RIP-2, static IP routing 
Remote Management Protocol 
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI
Features 

BOOTP support, ARP support, VLAN support, Syslog support, DiffServ support, IPv6 support, Spanning Tree Protocol (STP) support, DHCP snooping,

Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), fanless, Shaped Round Robin (SRR), MAC

Address Notification, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (CoS),

Weighted Tail Drop (WTD)      

Compliant Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3az
Power
AC 120/230 V ( 50/60 Hz )
Dimensions (WxDxH) 
26.9 cm x 21.3 cm x 4.44 cm
Weight 
1.72 kg

Optical Transceivers for Cisco WS-C3560CX-8TC-S Switch 

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000BASE-T, 1000BASE-SX, 1000Base-LX/LH, 1000BASE-ZX, 1000BASE-BX-D, 1000BASE-BX-U. For more information on these Cisco optical transceivers, please check the following table
MFG Part number
Description
Price
GLC-T 
Cisco GLC-T Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver 
US$13.02
GLC-TE
Cisco GLC-TE Transceiver Module Compatible 1000M SFP Copper 100m 
US$13.02 
GLC-BX-D
Cisco GLC-BX-D Compatible 1000BASE-BX-D SFP 1490nm-TX/1310nm-RX 10km DOM Transceiver 
US$12.00
GLC-BX-U
Cisco GLC-BX-U Compatible 1000BASE-BX-U SFP 1310nm-TX/1490nm-RX 10km DOM Transceiver
US$9.00 
GLC-GE-100FX 
Cisco GLC-GE-100FX Compatible 100BASE-FX SFP 1310nm 2km Transceiver for Gigabit Ethernet SFP Ports 
US$6.98
GLC-LH-SMD
Cisco GLC-LH-SMD Compatible 1000Base-LX/LH SFP 1310nm 10km DOM Transceiver
US$7.00
GLC-SX-MMD 
Cisco GLC-SX-MMD Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver 
US$6.00
GLC-EX-SMD
Cisco GLC-EX-SMD Compatible 1000BASE-EX SFP 1310nm 40km DOM Transceiver 
US$12.00
GLC-ZX-SMD
Cisco GLC-ZX-SMD Compatible 1000BASE-ZX SFP 1550nm 70km DOM Transceiver 
US$24.00 
GLC-ZX-SM
Cisco GLC-ZX-SM Compatible 1000BASE-ZX SFP 1550nm 70km Transceiver
US$24.00 
GLC-LH-SM
Cisco GLC-LH-SM Compatible 1000Base-LX/LH SFP 1310nm 10km Transceiver
US$7.00
GLC-SX-MM 
Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m Transceiver 
US$6.00 
DWDM SFP 
1.25G DWDM 80km SFP Transceiver 1528~1564nm LC SM Duplex DDM Optical Module 
US$186.00 
CWDM SFP 
1.25G CWDM SFP 1270~1450nm 120km LC DDM Optical Transceiver 
US$55.00
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco WS-C3560CX-8TC-S switches help to optimize network deployments. This Gigabit Ethernet (GbE) managed switches are ideal for high-speed data connectivity, Wi-Fi backhaul, and Power over Ethernet (PoE) connectivity in places where space is at a premium. With a single copper or fiber cable from the wiring closet, Catalyst compact switches enable IP connectivity for devices such as IP phones, wireless access points, surveillance cameras, PCs, and video endpoints. These switches are compatible with various Gigabit Ethernet SFP optical transceivers. All these fiber optic transceivers are available on Cozlink at really competitive prices. You can expect same day shipping on Cozlink. Not just optical transceivers, you can also find fiber optic pigtails and high speed cables for your choice on Cozlink.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.