Optical Transceivers for Cisco WS-C3560CG-8TC-S Switch

Cisco WS-C3560CG-8TC-S Switch Overview

WS-C3560CG-8TC-S belongs to the Cisco Catalyst 3560-CG Series Switches; these switches are best for office workspace, micro branch office, classroom, cruise ship, and other wiring-constrained environments. The Cisco Catalyst 3560-CG Compact Switches are small form-factor Fast Ethernet and Gigabit Ethernet switches designed for deployments outside the wiring closet. Enterprise and commercial customers can deliver advanced security services, unified communications, wireless, IP video cameras, and other applications for the office workspace, micro branch office, classroom, cruise ship, and other wiring-constrained environments.

Cisco WS-C3560CG-8TC-S Switch

Cisco WS-C3560CG-8TC-S Switch Parameters

Device Type 
Switch - 8 ports - Managed          
Enclosure Type 
Desktop 1U
Subtype 
Gigabit Ethernet
Ports
8 x 10/100/1000 + 2 x shared SFP 
Performance
Forwarding performance (64-byte packet size): 13.2 Mpps ¦ Forwarding performance: 10 Gbps 
Capacity
Virtual interfaces (VLANs): 255
Jumbo Frame Support
9018 bytes 
Routing Protocol
OSPF, RIP-1, RIP-2, BGP, OSPFv2, OSPF for IPv6 
Remote Management Protocol
SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, CLI
Features 

DHCP support, auto-negotiation, BOOTP support, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ

support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, DHCP snooping,

Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List

(ACL) support, Quality of Service (QoS), Dynamic ARP Inspection (DAI), STP Root Guard, Uni-Directional Link Detection (UDLD), fanless, DHCP relay,

Remote Switch Port Analyzer (RSPAN)    

Compliant Standards 
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3at 
Power 
AC 120/230 V ( 50/60 Hz ) 
Dimensions (WxDxH)
26.9 cm x 21.3 cm x 4.4 cm
Weight
1.35 kg

Optical Transceivers for Cisco WS-C3560CG-8TC-S Switch 

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000BASE-SX, 1000Base-LX/LH, 1000BASE-ZX, 1000BASE-BX-D, 1000BASE-BX-U. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number 
Description
Price 
GLC-FE-100FX
Cisco GLC-FE-100FX Compatible 100BASE-FX SFP 1310nm 2km DOM Transceiver 
US$6.98 
GLC-FE-100LX
Cisco GLC-FE-100LX Compatible 100BASE-LX10 SFP 1310nm 10km Transceiver 
US$6.98
GLC-FE-100BX-D
Cisco GLC-FE-100BX-D Compatible 100BASE-BX-D SFP 1550nm-TX/1310nm-RX 10km DOM Transceiver
US$9.77
GLC-FE-100BX-U
Cisco GLC-FE-100BX-U Compatible 100BASE-BX-U SFP 1310nm-TX/1550nm-RX 10km DOM Transceiver
US$8.84
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco WS-C3560CG-8TC-S uses Gigabit Ethernet SFP optical transceivers to establish fiber optic connections. These transceiver transceivers are field-replaceable, and provide uplink interfaces when inserted in an SFP module slot. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.