Optical Transceivers for Cisco WS-C2960XR-48TS-I Switch

Cisco WS-C2960XR-48TS-I Switch Overview

WS-C2960XR-48TS-I belongs to the Cisco Catalyst 2960-X Series Switches, Due to its enhanced features is best utilized in enterprise class businesses and can be used in multiple branch office networks or campus networks. Size of the business can be small to medium sized for this switch. Cisco Catalyst WS-C2960XR-48TS-I IP Lite Base layer 2 - 3 stackable switch is comprised of 48 * 10/100/1000 Ethernet ports and 4 SFP uplink interfaces. Advanced energy management solution with intelligent services reduces the cost of business development. FlexStack plus technology supports up to 8 switches with 80Gbps of stack throughput. Cisco IOS software features enhance forwarding process and USB/Ethernet management interface simplifying the operations. Netflow lite simplifies the network traffic monitoring procedure by capturing and recording packet flows in order to find the cause of thrill on the network. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM stub, etc.

Cisco WS-C2960XR-48TS-I Switch

Cisco WS-C2960XR-48TS-I Switch Parameters

Device Type 
Switch - 48 ports - L3 - Managed - stackable   
Enclosure Type 
Desktop, rack-mountable 1U 
Subtype
Gigabit Ethernet 
Ports 
48 x 10/100/1000 + 4 x SFP 
Performance
Switching capacity: 216 Gbps ¦ Forwarding performance (64-byte packet size): 107.1 Mpps
Capacity
Active VLANs: 1023
 Jumbo Frame Support 
9216 bytes
Routing Protocol 
OSPF, RIP-1, RIP-2, HSRP, VRRP, PIM-SM, PIM-DM, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng          
Remote Management Protocol
SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI 
Features

Full duplex capability, Layer 2 switching, auto-negotiation, BOOTP support, ARP support, Cisco Fast EtherChannel, VLAN support,

auto-uplink (auto MDI/MDI-X), Cisco Gigabit EtherChannel, IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control,

IPv6 support, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support,

Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support,

Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Jumbo Frames support,

MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link

Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), DHCP relay, Link Aggregation Control Protocol (LACP),

MAC Address Notification, Remote Switch Port Analyzer (RSPAN), layer 3 load balancing, Per-VLAN Rapid Spanning Tree (PVRST), NetFlow,

Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ),

Class of Service (CoS), Cisco FlexStack Plus, DiffServ Code Point (DSCP) support, IGMP filtering 

Compliant Standards 
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3az, IEEE 802.1AX
Power
AC 120/230 V ( 50/60 Hz ) 
Power Redundancy
Optional
Dimensions (WxDxH)
44.5 cm x 40.8 cm x 4.45 cm
Weight
6 kg

Optical Transceivers for Cisco WS-C2960XR-48TS-I Switch 

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000BASE-BX-D, 1000Base-LX/LH, 1000BASE-SX, 1000BASE-ZX, 1000BASE-T. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number 
Description 
Price
GLC-BX-D 
Cisco GLC-BX-D Compatible 1000BASE-BX-D SFP 1490nm-TX/1310nm-RX 10km DOM Transceiver 
US$12.00 
GLC-BX-U 
Cisco GLC-BX-U Compatible 1000BASE-BX-U SFP 1310nm-TX/1490nm-RX 10km DOM Transceiver 
US$9.00 
GLC-LH-SMD
Cisco GLC-LH-SMD Compatible 1000Base-LX/LH SFP 1310nm 10km DOM Transceiver 
US$7.00 
GLC-SX-MMD
Cisco GLC-SX-MMD Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver 
US$6.00 
GLC-ZX-SMD 
Cisco GLC-ZX-SMD Compatible 1000BASE-ZX SFP 1550nm 70km DOM Transceiver 
US$24.00 
GLC-T 
Cisco GLC-T Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver 
US$13.02
GLC-TE
Cisco GLC-TE Transceiver Module Compatible 1000M SFP Copper 100m 
US$13.02
GLC-ZX-SM 
Cisco GLC-ZX-SM Compatible 1000BASE-ZX SFP 1550nm 70km Transceiver 
US$24.00 
GLC-LH-SM 
Cisco GLC-LH-SM Compatible 1000Base-LX/LH SFP 1310nm 10km Transceiver
US$7.00 
GLC-SX-MM
Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m Transceiver 
 US$6.00 
CWDM SFP
1.25G CWDM SFP 1270~1450nm 120km LC DDM Optical Transceiver
US$55.00 
GLC-GE-100FX 
Cisco GLC-GE-100FX Compatible 100BASE-FX SFP 1310nm 2km Transceiver for Gigabit Ethernet SFP Ports
US$6.98
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco WS-C2960XR-48TS-I is a special switch designed by Cisco System to display unimaginable performance and quality at an affordable price. It offers up to 48 ports for the business allowing it to be integrated into any network quickly and easily. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.