Optical Transceivers for Cisco WS-C2960X-24TS-LL Switch

Cisco WS-C2960X-24TS-LL Switch Overview

WS-C2960X-24TS-LL belongs to the Cisco Catalyst 2960-X Series Switches, this switch is best for fresh level business, mid-market, and branch office networks. Size of the business can be small to medium sized for this switch. Cisco Catalyst 2960X-24TS-LL LAN Lite Layer 2 switch provides standalone mode with no FlexStack plus supporting and no NetFlow lite features.

Cisco WS-C2960X-24TS-LL

Cisco WS-C2960X-24TS-LL Switch Parameters

Device Type  Switch - 24 ports - Managed - stackable    
Enclosure Type  Desktop, rack-mountable 1U 
Subtype  Gigabit Ethernet
Ports  24 x 10/100/1000 + 2 x Gigabit SFP 
Performance Switching capacity: 100 Gbps ¦ Forwarding performance (64-byte packet size): 68.5 Mpps
Capacity  Virtual interfaces (VLANs): 64
Jumbo Frame Support  9216 bytes 
Remote Management Protocol  SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI
Features 

Layer 2 switching, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IPv6 support, Rapid Spanning Tree

Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support,

Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, RADIUS support, Jumbo Frames support, MLD snooping, Dynamic ARP

Inspection (DAI), Cisco EnergyWise technology, Unicast Reverse Path  Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning

Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), NetFlow,

Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet

Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1ae, IEEE 802.3az, IEEE 802.1AX 
Power  AC 120/230 V ( 50/60 Hz )
Power Redundancy Optional 
Dimensions (WxDxH)   44.5 cm x 27.9 cm x 4.5 cm 
Weight 3.7 kg
Optical Transceivers for Cisco WS-C2960X-24TS-LL Switch
Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000Base-LX/LH, 1000BASE-SX, 1000BASE-T, 100BASE-FX. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number  Description Price
GLC-LH-SMD  Cisco GLC-LH-SMD Compatible 1000Base-LX/LH SFP 1310nm 10km DOM Transceiver  US$7.00 
GLC-SX-MMD Cisco GLC-SX-MMD Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver US$6.00
GLC-T  Cisco GLC-T Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver  US$13.02 
GLC-TE Cisco GLC-TE Transceiver Module Compatible 1000M SFP Copper 100m  US$13.02 
GLC-LH-SM Cisco GLC-LH-SM Compatible 1000Base-LX/LH SFP 1310nm 10km Transceiver  US$7.00
GLC-SX-MM  Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m Transceiver  US$6.00 
GLC-GE-100FX  Cisco GLC-GE-100FX Compatible 100BASE-FX SFP 1310nm 2km Transceiver for Gigabit Ethernet SFP Ports US$6.98
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

 

System software / license

System software

IOS LAN Lite

license

NERGY-MGT-100-K9, EW-DO-100-DE

features

● Jumbo Frames

● VLANS 

●Voice Vlan 

●VTPv2 

●CDPv2 

●LLDP 

● 802.3ad LACP 

● PVST/PVST+ 

● 802.1W/802.1S 

● Port Fast/Uplink Fast 

● port CoS Trust and Override 

● Scheduling 

● Priority Queuing 

● Configure CoS Priority Queues 

● Weighted Tail Drop 

● DSCP transparency 

Network security

● SSH, SSL and SCP

● RADIUS and TACACS+

● SNMPv3 crypto

● 802.1x

● 802.1x Accounting / MIB

● 802.1x w/ port security 

● 802.1x w/Voice VLAN

● 802.1x Guest VLAN

● 802.1x VLAN assignment

● 802.1x MAC-Auth Bypass

● BPDU/Root Guard

● Port Security

● Private VALN Edge

● Storm Control

● Block unknown unicast and multicast

● IGMP Snooping

● IGMP Filter/Throttle

Management and Troubleshooting

● Auto-MDOX

●TDR

● UDLD

● IP SLA Responder

● layer 2 / IP Traceroute

● SPAN

● RSPAN

● Express Setup 

● Device Manager

● Cisco Network Assistant

● Smartports + Advisor

● Troubleshooting Advisor

● Drag-and-drop Cisco IOS Upgrade

● IP Address DHCP

● Autoinstall with saved configuration

● Configuration Replace

● DHCP Auto Image Upgrade

● DHCP Port Based Allocation

● Error Disable MIB

Environmental Ranges

Operating temperature up to 5000 ft (1500 m)

23ºF to 113º

Operating temperature up to 10,000 ft (3000 m)

23ºF to 104ºF

Short-term exception at sea level*

23ºF to 131ºF

Short-term exception up to 5000 feet (1500 m)*

23ºF to 122ºF

Short-term exception up to 10,000 feet (3000 m)*

23ºF to 113ºF

Short-term exception up to 13,000 feet (4000 m)*

23º to 104ºF

Storage temperature up to 15,000 feet (4573 m)

-13º to 158ºF

Operating altitude

Up to 10,000 feet

Storage altitude

Up to 13,000 feet

Operating relative humidity

10% to 95% noncondensing

Storage relative humidity

10% to 95% noncondensing

 

NEW Cisco WS-C2960X-24TS-LL 24 Port Switch 2 SFP LAN Lite Network Device 370W AC

Cisco Catalyst 2960-X series switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications. Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure and energy-efficient business operations.

Cisco Catalyst 2960-X series switches are designed for operational simplicity to lower total cost of ownership, and enable scalable, secure and energy-efficient business operations. The Cisco Catalyst 2960-X series switches provide a range of security features to limit access to the network and mitigate threats. Cisco Catalyst 2960-X series switches offer a number of redundancy and resiliency features to prevent outages and help ensure that the network remains available.

The Cisco Catalyst 2960-X series switches offers intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed.

Model

Dimensions

Weight

Inches (H x D x W)

Centimeters (H x D x W)

Pounds

Kilograms

WS-C2960X-24TS-LL

1.75 x 11.0 x 17.5

4.5 x 27.9 x 44.5

8.2

3.7

Summary

The Cisco WS-C2960X-24TS-LL features 24 10/100/1000 Ethernet ports. It features Cisco IOS software that enhances forwarding process and Ethernet management interface simplify the operations. It features Secure Shell (SSH) Protocol and Simple Network Management Protocol Version 3 (SNMPv3) that provide network security by encrypting administrator traffic during SNMP and Telnet sessions. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.