Optical Transceivers for Cisco WS-C2960S-F48LPS-L Switch

Cisco WS-C2960S-F48LPS-L Switch Overview

WS-C2960S-F48LPS-L belongs to the Cisco Catalyst 2960 S Series Switches; this switch features Power over Ethernet (PoE) that provide desktop Fast Ethernet and Gigabit Ethernet connectivity, enabling highly secured LAN services for entry-level enterprise, midmarket, and branch office networks. Cisco WS-C2960S-F48LPS-L switch is enterprise-class layer 2 switch for branch and midsize campus applications. It enables reliable and secure network access with feature the lower total cost of ownerships. Cisco WS-C2960S-F48LPS-L switch comes with 48 Fast ethernet ports with POE+ capability to provide up to 370W total POE budget and 4 Gigabit SFP uplinks for multiswitch depolyments. This product supports flexstack technology, stacking is enabled by optional hot-swappable module. Flexstack technology provides a unified data plane, analyze a stack to be configured and managed as a single switch, the switch also support mixed stacking, which means 2960SF and 2960-S can be combined in a single stack.

Cisco WS-C2960S-F48LPS-L Switch

Cisco WS-C2960S-F48LPS-L Switch Parameters

Device Type 
Switch - 48 ports - Managed - stackable         
Enclosure Type
Desktop, rack-mountable 1U 
Subtype
Fast Ethernet
Ports
48 x 10/100 (PoE+) + 4 x Gigabit SFP 
Power Over Ethernet (PoE)
PoE+ 
PoE Budget
370 W
Performance 
Switching capacity: 176 Gbps ¦ Forwarding performance: 88 Gbps 
Capacity
Virtual interfaces (VLANs): 255 
MAC Address Table Size 
8K entries
Jumbo Frame Support
9216 bytes
Remote Management Protocol 
SNMP 1, SNMP 2, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI
Features 

Layer 2 switching, dynamic IP address assignment, power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, Cisco Fast EtherChannel, load balancing,

VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control,

Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking

Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of

Service (QoS), RADIUS support, Dynamic ARP Inspection (DAI), PoE+, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+),

haped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN),

Multicast VLAN Registration (MVR), Strict Priority Queuing (SPQ), Cisco FlexStack  

Compliant Standards 
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at 
Power 
AC 120/230 V ( 50/60 Hz )
Dimensions (WxDxH) 
44.5 cm x 38.6 cm x 4.5 cm
Weight 
 5.7 kg

Optical Transceivers for Cisco WS-C2960S-F48LPS-L Switch 

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000BASE-T, 1000BASE-SX, 1000Base-LX/LH, 1000BASE-ZX, 1000BASE-BX-D, 1000BASE-BX-U. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number 
Description 
Price 
GLC-T 
Cisco GLC-T Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver 
US$13.02
GLC-TE
Cisco GLC-TE Transceiver Module Compatible 1000M SFP Copper 100m
US$13.02
GLC-SX-MM 
Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m Transceiver 
US$6.00 
GLC-LH-SM 
Cisco GLC-LH-SM Compatible 1000Base-LX/LH SFP 1310nm 10km Transceiver
US$7.00
GLC-ZX-SM 
Cisco GLC-ZX-SM Compatible 1000BASE-ZX SFP 1550nm 70km Transceiver 
US$24.00
GLC-ZX-SMD
Cisco GLC-ZX-SMD Compatible 1000BASE-ZX SFP 1550nm 70km DOM Transceiver
US$24.00
GLC-BX-D 
Cisco GLC-BX-D Compatible 1000BASE-BX-D SFP 1490nm-TX/1310nm-RX 10km DOM Transceiver
US$12.00 
GLC-BX-U
Cisco GLC-BX-U Compatible 1000BASE-BX-U SFP 1310nm-TX/1490nm-RX 10km DOM Transceiver 
US$9.00 
CWDM SFP
1.25G CWDM SFP 1270~1450nm 120km LC DDM Optical Transceiver
US$55.00
GLC-SX-MMD
Cisco GLC-SX-MMD Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver
US$6.00
GLC-LH-SMD
Cisco GLC-LH-SMD Compatible 1000Base-LX/LH SFP 1310nm 10km DOM Transceiver
US$7.00
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco WS-C2960S-F48LPS-L is used for Layer 2 switching. This switch is ideal for applying basic security policies to limit access to the network and reduce threats. It reduces total cost of ownership through simplified installation and operation. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.