- Related articles
- All Cisco MA-SFP-1GB-TX's information (List price, Specs, Datasheet PDF, Compatibility mat
- All Cisco ONS-XC-10G-S1's information (Overview, List price, Specs, Datasheet PDF)
- Optical Transceivers for Cisco WS-C3750X-12S-S Switch
- How does a network interface card work?
- Cisco 550X Series Stackable Managed Switches Offer…
- Applicable to 40GBASE-UNIV Standard Optical Transceiver Models
- Difference between transmitter and receiver
- Optical Transceivers for Cisco N5548UPM-6N2248TP Switch
- Optical Transceivers for Cisco WS-C2975GS-96PS-LM Switch
- Optical Transceivers for Cisco WS-C3650-48FD-L Switch

Cisco WS-C2960+48PST-L Switch Overview
WS-C2960+48PST-L belongs to the Cisco Catalyst 2960 Series Switches; its Fast Ethernet switches that provide enterprise-class Layer 2 switching for branch offices, conventional workspaces, and infrastructure applications. The WS-C2960+48PST-L is a LAN Base switch that provides 48 x 10/100 PoE Ethernet ports, 2 x 1000BT and 2 x SFP uplink interfaces.
Cisco WS-C2960+48PST-L Switch Parameters
Device Type | Switch - 48 ports - Managed |
Enclosure Type | Rack-mountable 1U |
Subtype | Fast Ethernet |
Ports | 48 x 10/100 (PoE) + 2 x Gigabit SFP + 2 x 10/100/1000 |
Power Over Ethernet (PoE) | PoE |
PoE Budget | 370 W |
Performance | Switching capacity: 16 Gbps ¦ Forwarding performance (64-byte packet size): 13.1 Mpps |
Capacity | Active VLANs: 255 |
Jumbo Frame Support | 9018 bytes |
Remote Management Protocol | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP |
Features | Layer 2 switching, auto-sensing per device, dynamic IP address assignment, DHCP support, power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN) |
Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP) |
Power | AC 120/230 V ( 50/60 Hz ) |
Dimensions (WxDxH) | 45 cm x 33.2 cm x 4.4 cm |
Weight | 5.4 kg |
Optical Transceivers for Cisco WS-C2960+48PST-L Switch
Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 100BASE-FX, 100BASE-LX, 100BASE-BX-D, 100BASE-BX-U. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number | Description | Price |
GLC-GE-100FX | Cisco GLC-GE-100FX Compatible 100BASE-FX SFP 1310nm 2km Transceiver for Gigabit Ethernet SFP Ports | US$6.98 |
GLC-FE-100FX | Cisco GLC-FE-100FX Compatible 100BASE-FX SFP 1310nm 2km DOM Transceiver | US$6.98 |
GLC-FE-100LX | Cisco GLC-FE-100LX Compatible 100BASE-LX10 SFP 1310nm 10km Transceiver | US$6.98 |
GLC-FE-100BX-D | Cisco GLC-FE-100BX-D Compatible 100BASE-BX-D SFP 1550nm-TX/1310nm-RX 10km DOM Transceiver | US$9.77 |
GLC-FE-100BX-U | Cisco GLC-FE-100BX-U Compatible 100BASE-BX-U SFP 1310nm-TX/1550nm-RX 10km DOM Transceiver | US$8.84 |
How to determine what types of optical transceivers for Cisco switches?
Summary
