Cisco OneX Converter Module: the CVR-X2-SFP10G & CVR-X2-SFP10G=

“I have a X2-10GB-LX4 in a core switch, I need to connect a WLC8510 which uses SFP+ optics, is there a compatible SFP that will work?”


To solve this problem, there are two options:


Way One: As the LX4 is not supported in a Cisco SFP+ footprint, you will need to change out the optics in your core switch to be compatible with a module compatible in the 8510.


So select the SFP-10G-SR, and purchase a SC-LC fiber cable to connect each other.


Way Two: If you choose the CVR-X2-SFP10G, you also need to buy other two SFP-10G-SR.


And what is the CVR-X2-SFP10G? So in the following part we will introduce you the CVR-X2-SFP10G and the CVR-X2-SFP10G=. They are Cisco OneX Converter Module? Who is the Cisco OneX Converter Module?


The Cisco OneX Converter Module offers investment protection for 10 Gigabit Ethernet X2 ports of Cisco switches by enabling migration from X2 to Small Form-Factor Pluggable Plus (SFP+) form factor without having to upgrade the switches or modules.

Cisco OneX Converter Module

Cisco OneX Converter Module

The OneX Converter Module converts a 10 Gigabit Ethernet X2 port into a 10 Gigabit Ethernet SFP+ port. With the OneX Converter Module, customers have the flexibility to use the 10 Gigabit X2 interface port of a switch with X2 modules or SFP+ modules. This flexibility is critical when the specific type of interface is not available in one or the other form factor or when customers want to use the same form factor for interfaces across multiple platforms deployed in their network.

Compatible Switch Models and SFP+ Modules

The table below lists The Cisco SFP+ transceiver modules that can be plugged into the OneX Converter Module.

Compatible SFP+ Modules

Dimensions: Dimensions (D x W x H) are 3.87 inches X 1.65 inches X 0.75 inches (98.3 mm x 41.9 mm x 19.1 mm). The Cisco OneX Converter Module typically weighs less than 0.6 lb (300 g).

Ordering Information

Product NameProduct Description
CVR-X2-SFP10GOneX Converter Module
CVR-X2-SFP10G=OneX Converter Module (spare)

Cisco oneX converter module overview

The Cisco oneX converter module (model CVR-X2-SFP10G),also known as a converter module, is a hot-swappable input/output (I/O) device that slides into a 10-Gigabit Ethernet X2 slot on a switch. It converts the 10-Gigabit X2 interface into a single 10-Gigabit SFP+ interface. It is supported on many platforms using X2 interfaces. The converter module supports one small-form factor pluggable plus (SFP+) module. The module plugs into the converter module slot to establish fiber-optic and copper connections to network devices.



TECHNICAL SUPPORT
Get solutions or consultation from the technical team.