Nowadays, with the rapid development of science and technology and the continuous improvement of user‘s needs, 40G applications in the communications industry are becoming more and more widely, at the same time, servers, switches, optical modules and other devices are also upgrading, the solutions f

BNC interfaceBNC interface refers to the coaxial cable interface for 75 Euro coaxial cable connection to provide receiver (RX) and sender (TX) channels, which is used for unbalanced signal connection.Fiber interfaceThe fiber interface is the physical interface used to connect the fiber optical cable

With the rapid development of optical communication in recent years, users have increasing demands for the network. In this condition, 100G optical module has become the hot focus that users care. What is a 100G optical module? This post will give a complete introduction and guide about 100G optical

Distinction between SFP multi-mode and single-mode According to the wavelength, it can be divided into 850nm/1310nm/1550nm/1490nm/1530nm/1610nm. The one with wavelength of 850nm is SFP multi-mode with transmission distance of 2KM or less;The one with wavelength of 1310/1550nm is SFP single-mode with

IntroductionIn this article we will discuss about the 1000BASE-ZX Ethernet standard and its optical transceivers and the brands offer which offers you these and their basic solutions, So you can have a basic understanding for 1000BASE-ZX technology to understand the basic solutions to 1000BASE-ZX. A

WDM transceiver means wavelength-division multiplexing transceiver and this is a technology which multiplexes a number of optical carrier signals onto a single optical fiber by using different wavelengths of laser light. This technique enables bidirectional communications over one strand of fiber, a

Definition:An optical fiber (or optical fibre) is a flexible, transparent fiber made by drawing glass (silica) or plastic to a diameter slightly thicker than that of a human hair. Optical fibers are used most often as a means to transmit light between the two ends of the fiber and find wide usage in

Cisco XFP10GER192IR-RGD OverviewThis Cisco XFP10GER192IR-RGD compatible XFP transceiver provides 10GBase-ER throughput up to 40km over single-mode fiber (SMF) at a wavelength of 1550nm using a LC connector. It is also capable of withstanding rugged environments and can operate at temperatures betwee

Cisco GLC-LH-SM-20 OverviewCisco GLC-LH-SM-20 is 1310nm wavelength, Duplex Cisco optical transceiver, through LC connector, transmitting distance can reach up to 20km .Main FeaturesDual data-rate of 1.25Gbps/1.063Gbps operation1310nm FP laser and PIN photodetector for 20km transmissionCompliant with