Optical Transceivers for Cisco WS-C3560E-48TD-E Switch

Cisco WS-C3560E-48TD-E Switch Overview

WS-C3560E-48TD-E belongs to the Cisco Catalyst 3600 Series Switches; it’s an ideal product for large enterprises. Cisco Catalyst 3560-E Series is an enterprise-class line of standalone access and aggregation switches that ease the deployment of secure converged applications. Cisco 3560E switches combine 10/100/1000 and Power over Ethernet (PoE) configurations with uplinks that easily upgrade from 1 Gb Ethernet to 10 Gb Ethernet. They enhance worker productivity by enabling applications such as IP telephony, wireless, and video.

Cisco WS-C3560E-48TD-E Switch

Cisco WS-C3560E-48TD-E Switch Parameters

Device Type 
Switch - 48 ports - L3 - Managed               
Enclosure Type
Desktop, rack-mountable 1U
Subtype
Gigabit Ethernet
Ports
48 x 10/100/1000 (PoE) + 2 x X2
Performance 
Switching capacity: 128 Gbps ¦ Forwarding performance: 101.2 Mpps 
Capacity 
Virtual interfaces (VLANs): 1000 ¦ Switched virtual interfaces (SVIs): 1000
Jumbo Frame Support
9216 bytes
Routing Protocol 
OSPF, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, DVMRP, PIM-SM, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), RIPng, WCCPv2
Remote Management Protocol
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI
Features

Auto-sensing per device, DHCP support, auto-negotiation, ARP support, trunking, VLAN support,

auto-uplink (auto MDI/MDI-X), Cisco Gigabit EtherChannel, IGMP snooping, Syslog support, traffic

shaping, Broadcast Storm Control, IPv6 support, half duplex mode, full duplex mode, Multicast Storm

Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol

(RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking

Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support,

Quality of Service (QoS), Jumbo Frames support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping,

Dynamic ARP Inspection (DAI), Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD),

Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol

(LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing

Compliant Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Power
AC 120/230 V ( 50/60 Hz )
Dimensions (WxDxH) 
44.5 cm x 44.19 cm x 4.45 cm
Weight 
8.6 kg

Optical Transceivers for Cisco WS-C3560E-48TD-E Switch

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000BASE-T, 1000BASE-SX, 1000Base-LX/LH, 1000BASE-ZX, 1000BASE-BX-D, 1000BASE-BX-U. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number 
Description
Price
GLC-T
Cisco GLC-T Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver 
US$13.02
GLC-TE
Cisco GLC-TE Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver
US$13.02 
GLC-SX-MM
Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m Transceiver 
US$6.00
GLC-LH-SM
Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m Transceiver 
US$6.00 
GLC-SX-MMD
Cisco GLC-SX-MMD Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver
US$6.00
GLC-LH-SMD
Cisco GLC-LH-SMD Compatible 1000Base-LX/LH SFP 1310nm 10km DOM Transceiver 
US$7.00
GLC-ZX-SM
Cisco GLC-ZX-SM Compatible 1000BASE-ZX SFP 1550nm 70km Transceiver
US$24.00
GLC-ZX-SMD
Cisco GLC-ZX-SMD Compatible 1000BASE-ZX SFP 1550nm 70km DOM EXT Transceiver
US$24.00
GLC-BX-D
Cisco GLC-BX-D Compatible 1000BASE-BX-D SFP 1490nm-TX/1310nm-RX 10km DOM Transceiver 
US$12.00
GLC-BX-U
Cisco GLC-BX-U Compatible 1000BASE-BX-U SFP 1310nm-TX/1490nm-RX 10km DOM Transceiver 
US$9.00
SFP-GE-S
Cisco SFP-GE-S Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver 
US$6.00
SFP-GE-L 
Cisco SFP-GE-L Compatible 1000BASE-LX/LH SFP 1310nm 10km DOM Transceiver 
US$7.00
SFP-GE-Z 
Cisco SFP-GE-Z Compatible 1000BASE-ZX SFP 1550nm 70km DOM EXT Transceiver 
US$24.00
DWDM SFP
1.25G DWDM 120km SFP Transceiver 1528~1564nm LC SM Duplex DDM Optical Module 
US$204.60 
CWDM SFP 
1.25G CWDM SFP 1270~1450nm 120km LC DDM Optical Transceiver
US$55.00
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco WS-C3560E-48TD-E switch is an enterprise-class line of standalone access and aggregation switches that facilitate the deployment of secure converged applications while maximizing investment protection for evolving network and application requirements. This high quality Cisco switch works with a number of Gigabit Ethernet SFP optical transceivers. You can easily find these high quality fiber optic transceivers at very competitive rates on Cozlink. What makes this even better that Cozlink also offer you a wide range of patch cords, fiber optic pigtails and high speed cables to choose from and Cozlink also ensure that you get the same day shipping.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.