Optical Transceivers for Cisco N5020P-4N2232PF-B Switch

Cisco N5020P-4N2232PF-B Switch Overview

N5020P-4N2232PF-B belongs to the Cisco Catalyst Nexus 5000 Series Switches; these switches are ideal for traditional or fully automated data center deployments. The Cisco Nexus 5020 switch is a 2 RU, top-of-rack switch that provides Ethernet and Fiber Channel consolidation in a single physical cable. The Fiber Channel over Ethernet (FCoE) protocol is used to consolidate Ethernet and Fiber Channel traffic onto the same physical connection between the server and the switch. As a top-of-rack switch, all the servers in the rack connect to the Cisco Nexus 5020 switch, and it connects to the LAN or SAN. The Cisco Nexus 5020 switch is a part of a family of switches that provide 10-Gigabit Ethernet and FCoE ports and both 10-Gigabit Ethernet and native 1-, 2-, and 4-Gbps Fiber Channel ports.

Cisco N5020P-4N2232PF-B Switch

Cisco N5020P-4N2232PF-B Switch Parameters

Device Type 
Switch - 40 ports - Managed - with 4x Cisco Nexus 2232PP 10GE Fabric Extender, 64 x Fabric Extender Transceivers for N5K-to-N2K interconnect         
Enclosure Type
Desktop 2U
Subtype
10 Gigabit Ethernet
Ports
40 x SFP+
MAC Address Table Size
16K entries
Remote Management Protocol
SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SMI-S, SSH-2
Features

Layer 2 switching, trunking, VLAN support, Syslog support, packet filtering, Weighted Round

Robin (WRR) queuing, MAC address filtering, Broadcast Storm Control, IPv6 support, ASIC VPN,

Multicast Storm Control, Unicast Storm Control, Per-VLAN Spanning Tree (PVST), Multiple Spanning

Tree Protocol (MSTP) support, priority-based flow control, Access Control List (ACL) support,

Quality of Service (QoS), Jumbo Frames support

Compliant Standards
IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP)
Power 
AC 120/230 V ( 50/60 Hz )
Power Redundancy 
Yes
Dimensions (WxDxH)
43.9 cm x 76.2 cm x 8.8 cm

Optical Transceivers for Cisco N5020P-4N2232PF-B Switch 

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 10GBASE-SR, 10GBASE-LR, 10G SFP+ DAC Twinax Cable. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number
Description 
Price
SFP-10G-SR
Cisco SFP-10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m DOM Transceiver 
US$16.00
SFP-10G-LR
Cisco SFP-10G-LR Compatible 10GBASE-LR SFP+ 1310nm 10km DOM Transceiver 
US$32.55
SFP-10G-SR-S
Cisco SFP-10G-SR-S Transceiver Module Compatible 10G 10G SFP+ 850nm 300m 
US$16.00
SFP-10G-LR-S
Cisco SFP-10G-LR-S Transceiver Module Compatible 10G 10G SFP+ 1310nm 10km 
US$32.55
SFP-H10GB-CU1M
Cisco SFP-H10GB-CU1M Compatible 10G SFP+ DAC Twinax Cable (1-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU3M
Cisco SFP-H10GB-CU3M Compatible 10G SFP+ DAC Twinax Cable (3-meter, passive, SFP+ to SFP+, 30AWG) 

SFP-H10GB-CU5M
Cisco SFP-H10GB-CU5M Compatible 10G SFP+ DAC Twinax Cable (5-meter, passive, SFP+ to SFP+, 24AWG)

SFP-H10GB-ACU7M 
Cisco SFP-H10GB-ACU7M Compatible 10G SFP+ DAC Twinax Cable (7-meter, active, SFP+ to SFP+, 30AWG)

SFP-H10GB-ACU10M
Cisco SFP-H10GB-ACU10M Compatible 10G SFP+ DAC Twinax Cable (10-meter, active, SFP+ to SFP+, 28AWG)

Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco N5020P-4N2232PF-B switches provide consolidated I/O connectivity to both production Ethernet LANs and Fiber Channel SANs in a cost-effective, high-performance, low-latency Ethernet switch. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.