Optical Transceivers for Cisco WS-C2960S-48LPS-L Switch

Cisco WS-C2960S-48LPS-L Switch Overview

WS-C2960S-48LPS-L belongs to the Cisco Catalyst 2960 S Series Switches; This switch features Power over Ethernet (PoE) that provide desktop Fast Ethernet and Gigabit Ethernet connectivity, enabling highly secured LAN services for entry-level enterprise, midmarket, and branch office networks. The Cisco Catalyst 2960-S Series Switches WS-C2960S-48LPS-L is offering lited 48 Power over Ethernet (PoE) Ethernet 10/100/1000 ports with 370W PoE Power supply, while 12 ports PoE up to 30W per switch port, 24 ports PoE up to 15.4W per switch port or 48 ports up to 7.7W per switch port. As all the Cisco Catalyst 2960-S Series Switches with LAN Base Software, WS-C2960S-48LPS-L provides 4 One Gigabit Ethernet uplinks flexibility with Small Form-Factor Pluggable (SFP), providing business continuity and fast transition. Cisco FlexStack stacking module is also supported with 20 Gbps of throughput, allowing ease of operation with single configuration and simplified switch upgrade.

Cisco WS-C2960S-48LPS-L

Cisco WS-C2960S-48LPS-L Switch Parameters

Device Type
 Switch - 48 ports - Managed  
Enclosure Type 
Rack-mountable 1U 
Subtype
Gigabit Ethernet
Ports 
48 x 10/100/1000 (PoE) + 4 x SFP 
Power Over Ethernet (PoE) 
PoE 
Performance 
Switching capacity: 176 Gbps ¦ Forwarding performance (64-byte packet size): 77.4 Mpps 
MAC Address Table Size 
8K entries
Remote Management Protocol 
SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH 
Features 

 Layer 2 switching, auto-sensing per device, dynamic IP address assignment, power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing,

VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control,

Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP)

support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), PoE+, Link Aggregation Control Protocol (LACP),

Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN) 

Compliant Standards 
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at   
 Power
AC 120/230 V ( 50/60 Hz )
Dimensions (WxDxH) 
44.5 cm x 38.6 cm x 4.5 cm
Weight
5.77 kg

Optical Transceivers for Cisco WS-C2960S-48LPS-L Switch

Based on the SFP (optical module form factor) Gigabit Ethernet ports accommodate range SFP (optical module form factor) optical transceivers, including Cisco 1000BASE-T, 1000BASE-SX, 1000Base-LX/LH, 1000BASE-ZX, 1000BASE-BX-D, 1000BASE-BX-U. For more information on these Cisco optical transceivers, please check the following table.
MFG Part number
Description
Price
GLC-T 
Cisco GLC-T Compatible 1000BASE-T SFP Copper RJ-45 100m Transceiver 
US$13.02 
GLC-TE 
Cisco GLC-TE Transceiver Module Compatible 1000M SFP Copper 100m 
US$13.02 
GLC-SX-MM
Cisco GLC-SX-MM Compatible 1000BASE-SX SFP 850nm 550m Transceiver 
US$6.00 
GLC-LH-SM 
Cisco GLC-LH-SM Compatible 1000Base-LX/LH SFP 1310nm 10km Transceiver 
US$7.00 
GLC-ZX-SM 
Cisco GLC-ZX-SM Compatible 1000BASE-ZX SFP 1550nm 70km Transceiver 
US$24.00
GLC-ZX-SMD
Cisco GLC-ZX-SMD Compatible 1000BASE-ZX SFP 1550nm 70km DOM Transceiver 
US$24.00
GLC-BX-D 
Cisco GLC-BX-D Compatible 1000BASE-BX-D SFP 1490nm-TX/1310nm-RX 10km DOM Transceiver
US$12.00 
GLC-BX-U
Cisco GLC-BX-U Compatible 1000BASE-BX-U SFP 1310nm-TX/1490nm-RX 10km DOM Transceiver 
US$9.00 
CWDM SFP 
1.25G CWDM SFP 1270~1450nm 120km LC DDM Optical Transceiver 
US$55.00 
GLC-SX-MMD 
Cisco GLC-SX-MMD Compatible 1000BASE-SX SFP 850nm 550m DOM Transceiver
US$6.00
GLC-LH-SMD
Cisco GLC-LH-SMD Compatible 1000Base-LX/LH SFP 1310nm 10km DOM Transceiver 
US$7.00
Note: Cozlink compatible with Cisco optical module. For more information, please feel free to contact us.

How to determine what types of optical transceivers for Cisco switches?

1. Finding the corresponding optical module compatibility matrix via Cisco official website. 
2. On the running switches, enter the privileged mode and input # "show idprom interface gi1 / 0/48" command, you can query the optical module model and serial number, If not, try to input other two commands: xuxic or show idprom int g2/6
3. Checking the type and port based on the specification, it can be used as long as it is gigabit SFP optical module interface. But the specific models to be decided according to the actual demand, such as type, the actual use of distance, single-mode or multimode, single fiber or dual fiber etc. Welcome to consult Cozlink engineer.

Summary

The Cisco WS-C2960S-48LPS-L is used for Layer 2 switching. This switch is ideal for applying basic security policies to limit access to the network and reduce threats. It reduces total cost of ownership through simplified installation and operation. Just like all other switches from this series this particular model's also works with a lot of Gigabit Ethernet SFP optical transceivers which can be found in Cozlink with high quality and competitive price. Moreover, most of them have adequate inventory, which ensures the customers to enjoy same day shipping. In addition to providing optical transceivers, Cozlink also offers patch cords, fiber optic pigtails and high speed cables for your choice.
TECHNICAL SUPPORT
Get solutions or consultation from the technical team.