• The equipment consists of box body, base, fusion unit rack, fusion-integrated module, cable fixed grounding protection device, winding unit assembly and a cable trough assembly. The complete structural design enables the cable to be fixed and grounded.
• The connection, dispatch, distribution, inspection of optic fiber cable is convenient and reliable.
• The cabinet is cold-rolled steel or SMC material, beautiful appearance. It can be moisture-proof, waterproof, dustproof, salt spray proof, corrosion resistance and aging resistance, and the protection level is IP65.
• It can support the direct fusion and storage of rest optical cable.
• The splicing trays can be taken out from the cabinet for operation.
• Suitable for ribbon cable and non-belt cable.
• Card-mounted installation of FC, SC adapters, easy and fast operation.
• The adapter is at an angle of 30° to the front of the cabinet, and the curved radius of curvature of the optical fiber is ≧40 mm, and the arc in the optical fiber is prevented from burning the eyes;
• The distribution and scheduling of optical fibers are all positive operations.

Main Technical Indicators
Environmental indicators

• Environmental temperature: -40 ℃ ~+ 60 ℃
• Relative humidity: ≤ 93% (+ 40 ℃)
• Atmospheric pressure: 70KPa ~ 106Kpa

Electrical Specifications

• Insulation resistance: ≥ 20000MΩ/500V (DC)
• Withstanding voltage: ≥ 3000V (DC)/1min, no breakdown, no arcing

Optical indicators

• Connector attenuation (insertion, swap, repeat) ≤ 0.3dB
• Return Loss: SC (FC)/UPC ≥ 50dB, SC (FC)/APC ≥ 60dB

Cabinet Configuration Information

The cabinet capacity is up to 96 cores. It can install up to 8pcs distribution and feeder splicing trays. Per distribution and feeder splicing tray can install 12pcs SC/FC/ST adapters and pigtails. Dimension including the base is 780 * 450 * 280mm(H*W*D). (The capacity can be customized according to customer requirements).
Note: Below are the dimension diagram of 96 cores type for your check.



Optical Fiber Splicing Unit

Function: It is used for distributing cables in the terminal and distribution user area of trunk optical cable (connecting optical cable).
Type: A:12 cores splicing storage tray (SC/LC with adapter and pigtails)
B:12 cores splicing distribution tray（SC/FC with adapter and pigtails）


Splitter Unit (Optional)
For the installation of ABS type optical splitter, plug-in type optical splitter.
The splitter unit can be configured according to customer requirements if needed.
Transportation: 
The cabinet can adapt to all kinds of transport vehicles. In the process of transportation, the temperature should be -30 ℃ ~ +55 ℃, relative humidity is < 90%. It should be with an awning when temperature is > 30℃.
Product can’t be rained, soaked, sun exposure. Loading, unloading shall be carried out in accordance with the transportation operation marks brushed on the packaging. It shall not be placed upside down, sideways or turned over.

Storage: 
Cabinet should not be piled up over the overweight goods, indoor temperature should be -5 ℃ ~ + 40 ℃, relative humidity is < 75%. Storage environment should be ventilated and dry, no acid, base or sulfur compounds and other toxic gases. Storage in open air is not allowed.

Warning: 
Pls note that this cabinet is not suitable for installation in the coastal, saline-alkali areas or environments with strong acids and alkalis, where may cause the metal corrosion easily. If the cabinet is corroded or damaged by the users due to use in such an environment, it is not covered by our warranty.