10G DWDM SFP+ Transceivers are specifically designed for carriers and large enterprises that require a scalable, flexible, cost-effective system for multiplexing, transporting and protecting high-speed data, storage, voice and video applications in point-to-point, add/drop, ring, mesh and star network topologies. SEESUO supplies OEM service and Third-Party(Cisco, Juniper, HP, Dell etc.) compatible fiber optic transceivers.

SEESUO compatible SFP+ transceiver supports up to 80km link lengths over single-mode fiber (SMF) via an LC duplex connector. Digital diagnostics functions are accessible through a 2-wire serial interface as specified in SFF-8472, enabling real-time access to operating parameters. This transceiver utilizes Sumitomo's TOSA (Transmitter Optical Sub-Assembly), guaranteeing consistent performance while being compliant with Multi-Source Agreement (MSA) standards for seamless network integration.

The module is fiber transceivers for a wide variety of switches, routers, and other equipment. It allows enterprises and service providers to provide scalable and easy-to-deploy 10-Gbps LAN and WAN services in their networks.

Product Highlights:

• Tested in Targeted Switches for Superior Performance, Quality, and Reliability

• DWDM for Multiple Applications over One Duplex Fiber

• Hot Pluggable SFP+ MSA Compliant

• Digital Optical Monitoring Capability for Strong Diagnostic Capabilities

• Optical Interoperability with 10GBASE XFP Interfaces On the Same Link

• IEEE 802.3ae Compliant

Product Features:

• Supports 9.95 to 11.3 Gb/s bit rates
• Duplex LC connector
• Hot pluggable SFP+ footprint
• Cooled EML transmitter and APD receiver
• Applicable for 80km SMF connection
• Low power consumption, < 1.5W
• 100GHz channel spacing
• Digital Diagnostic Monitor Interface
• Optical interface compliant to ITU-T 694.1& G.698.1
• Electrical interface compliant to SFF-8431& SFF-8432
• Operating case temperature:
• Commerical: 0 to 70 °C
• Industrial: -40 to 85 °C

Applications:

• 10G Ethernet
• 2x,4x, 8x Fiber Channel
• ITU-T G.698.1
• Other optical links

FAQ:

Q:Is it necessary to clean a transceiver's optical connector? How to clean the 10G DWDM SFP+ transceivers?

A:Dust and contamination can accumulate on transceiver's connectors and cause problems such as reducing the optic launch power. To ensure better connection, SEESUO.COM strongly recommends cleaning both connectors each time you disconnect and reconnect them. SEESUO.COM High Quality NEOCLEAN-EZ LC/MU 1.25mm Pen One-Push Cleaner (750 cleans) is the best cleaning choice for 10G DWDM SFP+ transceivers.

Q:Once I place an order for my transceivers, how long will it take to receive them?

A:SEESUO.COM has been maintaining adequate stock level of the DWDM SFP+ transceivers in U.S. warehouse, EU warehouse and CN warehouse. As long as the products you order are all in stock, we will ship them out the same day you place your order. As for some specific products or products that have a short stock, we will keep you informed ahead of time before you place your order.

Q:Why should I trust FS.COM compatible transceivers?

A:Besides the price advantage we have compared to branded transceivers, FS.COM compatible transceivers also maintain the same performance and reliability. To satisfy our customers' needs of high performance, all of our transceivers are tested multiple times in mainstream original brand switches in our test center before shipped out.

Q:What's the operating temperature of the 10G DWDM SFP+ transceivers?

A:The FS.COM 10G DWDM SFP+ transceivers operate at a commercial temperature range (0 to 70°C). However, industrial temperature range(-40 to 85°C) are also available for custom.

Q:What are the wavelength range and channels the 10G DWDM SFP+ transceivers support?

A:The FS.COM 10G DWDM SFP+ transceivers support C17 to C61, 45 channels from 1563.86nm to 1528.77nm with 0.8nm wavelength intervals in 100Ghz grid .

Q:What's the 10G DWDM SFP+ transceivers supported distances?

A:The FS.COM 10G DWDM SFP+ transceivers support 40km to 80km over single mode fibers.